Pedal Parts / DIY

P-H501-PC Footswitch - 3PDT, Blue, PC Mount, latching-type
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$5.50
P-H503 Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.
$4.55
P-H503-PC Footswitch - DPDT, Momentary, PC Terminals
DPDT momentary footswitch with PC terminals. Black with 6 terminals. AC125V 4A, AC250V 2A. PC mount version of P-H503.
$4.55
P-H511 Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary Off-(On), push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.99
P-H52-WASHER-GND Washer - Chassis Ground, For 15/32” Bushings
Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.
$1.49
P-H534 Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
$4.95
P-H54-CAP-X Switch Accessory - Mini Toggle Caps
Colors Available:
Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
Starting at $0.59
P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.25
P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
P-H54-DRESS-X Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.75
P-H540 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.69
P-H541 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • On-On
$3.85
P-H5410 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
P-H5412 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$4.95
P-H5413 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$4.95
P-H5414 Switch - Carling, Mini Toggle, SPDT, 2 Position, PC Pins, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$3.85
P-H5415X Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Starting at $5.25
P-H5417 Switch - Carling, Mini Toggle, DPDT, 2 Position, PC Pins, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • PC mount pins
$4.95
P-H5418 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder Lugs
$5.45
P-H5419 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2 Position On-On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$6.55
P-H5420X Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
  • 0.354" bushing length
  • 3-Position
  • ¼" chassis hole diameter
  • DPDT ( Double Pole/ Double Throw) switch
  • Solder Lugs
Starting at $6.45
P-H542X Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $4.15
P-H544 Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
  • SPDT ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.
$3.85