Pedal Parts / DIY

P-QFXCORE Integrated Circuit - Experimental Noize FXCore, DSP, Multi-Effect / Reverb
FXCore from Experimental Noize is a DSP designed for creating audio effects in pro-audio devices. FXCore can operate as a standalone device when paired with appropriate CODECs where it generates all necessary clocks or as part of a more complex system where it will lock to the word clock and bit clock provided by another part of the system.
FXCore can store up to 16 programs and their associated register preset values in its internal FLASH memory so no external program storage is required.
$19.95
W-LB-KLB-3 ¼" Jack - Lumberg, Low Profile, Stereo, Double Open Circuit
Low profile stereo jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor
  • Double Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.79
W-LB-KLBM-3 ¼" Jack - Lumberg, Low Profile, Mono, Open Circuit
Low profile mono jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Mono 2-Conductor
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.55
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
$0.79
P-STTR-15 Machine Pin Socket - Preci-Dip, Break Away, 1 Row, 15 Position
High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.
$1.29
S-B421 Pedal Box - 7 ⅛” x 5” x 3", Fits 1590XX, 1590X
High quality crush-proof boxes that are perfectly sized for stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 7 ⅛” x 5” x 3" fit 1590XX, 1590X, and smaller sized pedals along with accessories such as power supplies or cables.. These boxes are ideal for storing or packaging effects pedals.
See S-B418 for boxes to fit 1590B, 1590G, 1590N1 / 125B enclosures.
See S-B430 for boxes to fit 1590BB, 1590N1 / 125B enclosures.
$1.75
P-H5414 Switch - Carling, Mini Toggle, SPDT, 2 Position, PC Pins, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$2.95
On Backorder
P-H5417 Switch - Carling, Mini Toggle, DPDT, 2 Position, PC Pins, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • PC mount pins
$3.49
P-H5415X Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Starting at $3.69
P-L35X LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
$0.70
P-H5413 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$3.49
P-H5418 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder Lugs
$3.75
P-H5419 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$4.95
On Backorder
R-VTL5CX Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in man effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $5.50
P-H501-L-X Footswitch - 3PDT, black body, Solder Lugs, Soft Click
Colors Available:
Black bodied 3PDT footswitches perfect for custom pedal builds. These footswitches feature a low actuation force for fast and responsive switching. Color options are available to dial in the look of your next build. Matching mounting hardware is included. Features
  • Latching Footswitch
  • 3PDT
  • Low Actuation Force
  • Solder Lugs
  • Matching Hardware Included
Starting at $2.45
P-H501-LP Footswitch - 3PDT, black body, Solder Lugs, Low Profile
Low profile switches with a smaller footprint than the standard 3PDT sizes. These footswitches are perfect for cramped layouts but are also great for general use. The small solder lugs are great for wiring by hand that also work well with PCB layouts. Mounting hardware included. Features
  • Latching Footswitch
  • 3PDT
  • Low Profile
  • Small Solder Lugs
  • Hardware Included
$3.35
P-K385X Knob - Pointer, Large, Knurled, vintage index line
Colors Available:
New!:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Starting at $0.95
P-PC-SB400 Breadboard - Solderable PCB, 3.00” x 1.90”
The SB400 Solderable PCB BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point BB400 solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus 4 power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used. BPS prototyping boards use high-quality FR4 glass epoxy PCBs for long life, with an anti-tarnish protective coating for easy soldering.
$4.95
P-PC-PAD2 PadBoard - Double Sided, Plated Holes, 3.94” x 3.15”, Mounting Holes
The PadBoard-2 prototyping circuit board has a general purpose pad-per-hole pattern which is good for analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
  • 31 x 39 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size2 = 100 x 80mm (3.94 x 3.15in), 1/16" thick (1.6mm)
$6.85
P-PC-PAD3U PadBoard - Double Sided, Plated Holes, 6.30” x 3.94”, Mounting Holes
The PadBoard-3U prototyping circuit board has a general purpose pad-per-hole pattern which is good for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. The PCB accepts a 96 pin DIN-41612 VME connector for backplane or board-to-board applications. Holes for ejector latches are provided. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$12.95
P-PC-ST2 StripBoard - Single Sided, 3.94” x 3.15”, Mounting Holes
ST2 StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. ST2 has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
  • Standard stripboard pattern, with tracks running the length of the board.
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$5.50
P-PC-ST3U StripBoard - Single Sided, 6.30” x 3.94”
ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
  • Standard stripboard pattern, with tracks running the length of the board.
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$9.95
P-RP-TQ2-5V Relay - Panasonic, DPDT, 5V, Single Coil, Non-Latching
High quality non-latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option. Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Non-Latching
  • Single Coil
  • 5V Coil Voltage

For a latching version, please see P-RP-TQ2-L-5V.
$3.25
P-K900X Knob - Chicken Head, mini, high-quality, brass insert, Set Screw
Colors Available:
New!:
High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
$0.79