Potentiometer - Alpha, Audio, PC Mount

Potentiometer - Alpha, Audio, PC Mount

Alpha
Potentiometer - Alpha, Audio, PC Mount image 1
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
$2.95
In Stock

Replacement for Marshall. Audio taper, 24mm.

If additional nuts are needed, please see part number R-VM-NUT-2

Part Numbers
ResistanceOur Part NumberUPC/EAN
22 kΩR-V22KA-M609722158466
100 kΩR-V100KA-M609722164023
220 kΩR-V220KA-M609722158435
1 MΩR-V1MA-M609722158404
Body Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage250V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.25W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperAudio
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
Packaging Information
Packaging Dimensions1.5 in. × 1.4 in. × 1 in.
Weight (Packaging)0.0243 lbs.
R-V22KA-M - 22 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage250V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.25W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperAudio
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V100KA-M - 100 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage250V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.25W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperAudio
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V220KA-M - 220 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage250V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.25W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperAudio
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V1MA-M - 1 MΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage250V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.25W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperAudio
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.

My Project Lists

You must be logged in to add items to a project list.

Questions? Contact us at [email protected], or give us a call at 480-820-5411

Product Reviews

4.43 out of 5 based on 7 reviews
James Whedbee - August 31st, 2021
5 out of 5

This potentiometer is a very close replacement for the broken originals. Same function and appearance.

allen.gordon - December 9th, 2015
5 out of 5

Excellent replacement for a JCM800 Model 2210 I recently repaired!

It WOULD be nice if there was a link to purchase extra nuts as 2 are required to set each properly.

allen.gordon - December 9th, 2015
5 out of 5

Excellent replacement for a JCM800 Model 2210 I recently repaired!

DG - April 7th, 2015
4 out of 5

Perfect fit for marshall replacements but you need to provide a way to buy extra nuts because they are an odd size and you need 2 in order to install them in the amp.

Gil Felix - March 19th, 2015
5 out of 5

Pot works great!

T Brown - August 25th, 2014
5 out of 5

Just what I needed, ordering and shipping quick and easy

AQ - August 24th, 2014
2 out of 5

In the picture it show A brass collar coming out of the potentiometer but the ones i got were just an aluminum collar i like things to look authentic and most if not all Marshall amplifiers have a brass collar on there potentiometers