Potentiometer - Alpha, Audio, SPST Switch
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
SKU:
R-VS-XA
Item ID:
003904
Application:
Brand:
Alpha
Shaft:
Taper:
Termination Style:
Type:
Type/Size:
RoHS Compliant
Resistance | Our Part Number | UPC/EAN |
---|---|---|
500 kΩ | R-VS-500KA | 609722159746 |
1 MΩ | R-VS-1MA | 609722159722 |
Body Depth | 20.3 mm | ||
Body Width | 24 mm | ||
Bushing Length | 6.5 mm | ||
Bushing Thread | M8X0.75 | ||
Hex Nut Thickness | 2 mm | ||
Hex Nut Width | 11 mm | ||
Insulation Resistance | >100 MΩ at 500VDC | ||
Life | 15,000 cycles | ||
Max. Working Voltage | 250V | ||
Max Rotational Stopper Strength | 6Kgf | ||
Operating (Useable) Temperature | -10 °C to +70 °C | ||
Rated Wattage (Power) | 0.25W | ||
Rotational Torque | 20-200 gf-cm | ||
Shaft Diameter | 6.35 mm | ||
Sliding Noise | <47 mV | ||
Taper | Audio | ||
Tolerance | 1 MΩ version | R-VS-1MA | ± 30% |
500 kΩ version | R-VS-500KA | ± 20% | |
Total Rotational Angle | 300° ±5° | ||
Total Shaft Length | 40 mm | ||
Washer I.D. | 8 mm | ||
Washer O.D. | 14 mm | ||
Washer Thickness | 0.4 mm | ||
Withstand Voltage | 500 VAC for 1 min. |
Packaging Dimensions | 2.6 in. × 1.3 in. × 1 in. | |
Weight (Packaging) | 0.042 lbs. |
R-VS-1MA - 1 MΩ version | Body Depth | 20.3 mm |
Body Width | 24 mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M8X0.75 | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 11 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Max. Working Voltage | 250V | |
Max Rotational Stopper Strength | 6Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.25W | |
Rotational Torque | 20-200 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Taper | Audio | |
Tolerance | ± 30% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 40 mm | |
Washer I.D. | 8 mm | |
Washer O.D. | 14 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-VS-500KA - 500 kΩ version | Body Depth | 20.3 mm |
Body Width | 24 mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M8X0.75 | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 11 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Max. Working Voltage | 250V | |
Max Rotational Stopper Strength | 6Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.25W | |
Rotational Torque | 20-200 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Taper | Audio | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 40 mm | |
Washer I.D. | 8 mm | |
Washer O.D. | 14 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
![]() | R-VS-1MA |
![]() | R-VS-500KA |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
3 answers
Please verify SPST means 2 terminals on back of body.
Asked by Anonymous on October 28th, 2016.
SPST means single-pole, single-throw. This switch has 3 terminals: cold, wiper, hot.
Actually, he is asking about the switch portion, not the potentiometer portion. SPST does mean there are two terminals on back of body for the switch portion; it is a simple on-off switch.
Correct, the two lugs on the bottom of this pot are for the SPST portion.
1 answers
Is the switch detent-type (i.e.when the shaft is turned fully counter-clockwise it clicks off) or push-pull type?
Asked by Anonymous on January 19th, 2017.
Yes, this switched potentiometer will click on/off when turned one direction or the other.
1 answers
Is it audio taper?
Asked by Anonymous on March 14th, 2018.
Yes, this is an audio taper pot.
1 answers
Is the switch normally open, or normally closed, and is the click for the switch fully clockwise or counterclockwise?
Asked by Anonymous on February 28th, 2019.
This switch is open at FCC.
1 answers
Do you have a pot like this one with a tap. I need one for an old Crosley radio. SKU: R-VS-XA
Item ID: 003904
I would assume the tap as at the 500k point.
Thanks and God bless,
Glenn
Asked by Anonymous on July 28th, 2019.
We do not carry any tapped potentiometers at this time.
1 answers
Suppose I use this as power for my amp, if I use the pot as volume, too--wont it be noisy?
(I can't find a rotary switch.. which is what I need for my old radio conversion to guitar amp. long shaft to get through the cabinet.)
Asked by [email protected] on January 18th, 2022.
There are many factors that contribute to excess noise, but using this as a power switch and volume knob is the most common application for this item, and it shouldn't add any excessive noise.
1 answers
What is the shaft length from the end of the threads?
Asked by Anonymous on September 23rd, 2022.
It is approximately 1.35" or 34mm.
1 answers
Do you have a pot exactly like this (500K + rotary switch) but with a plastic (insulated) shaft? thanks.
Asked by Anonymous on November 24th, 2022.
This is currently the only style of this potentiometer that we offer.
Product Reviews
Great item. Thanks.
This potentiometer works very well for antique radio restoration and the price is right! Very easy to file a D slot into the shaft. Fits the knob perfectly. Thanks much!
Worked perfectly in my old, trusty MSA volume pedal. Easy to install and quiet, great sweep, and true; highly recommended.
AES is my go to spot for vintage radio parts. They have the best prices, quality, shipping and service. This part is no exception. It goes in a 1946 RCA 66X1, now it sounds great.
It is hard to find a potentiometer with a long shaft. A long shaft can be shortened and modified to fit, but a shaft too short requires more work. Electrical performance seems to be just as good as original.
Perfect fit in my S-20R.
Very good parts and a good price
Buy them as long as they are available!
Excellent quality product. Well-packed and prompt delivery.
Excellent products. No problems at all.