Potentiometer - Alpha, Linear, PC Mount, for Marshall

Potentiometer - Alpha, Linear, PC Mount, for Marshall

Alpha
Potentiometer - Alpha, Linear, PC Mount, for Marshall image 1
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
$2.95
In Stock

Linear. 24mm.

If additional nuts are needed, please see part number R-VM-NUT-2

Part Numbers
ResistanceOur Part NumberUPC/EAN
4.7 kΩR-V4D7KL-M609722158749
22 kΩR-V22KL-M609722158480
100 kΩR-V100KL-M609722158312
220 kΩR-V220KL-M609722158442
Product Measurements by Type
Body Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
Packaging Information
Packaging Dimensions1.5 in. × 1.4 in. × 1 in.
Weight (Packaging)0.022 lbs.
Product Measurements by Item
R-V4D7KL-M - 4.7 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V22KL-M - 22 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V100KL-M - 100 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V220KL-M - 220 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet1.41 MB

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on August 9th, 2016.
Matt H.
August 9th, 2016
Staff Member
They should fit the original pots.
BradWbr
March 23rd, 2018
Staff Member
mine do not on a late 80's marshall reverb 12, shaft nut is smaller than original, you need two, comes with one only
Asked by Anonymous on July 27th, 2017.
Matt H.
July 27th, 2017
Staff Member
All of these dimensions can be found in the product measurements listed above. Overall length is 1.15" (29.3mm).

Product Reviews

4.88 out of 5 based on 8 reviews
Scott J. - September 13th, 2022
5 out of 5

I needed a 22k Linear replacement for a Marshall amp. I ordered that and a few others just to experiment with. These pots are not EVEN CLOSE to the standards of the original pots. Smaller lighter and not a great fit for older Marshalls. The one real issue is the brass collar diameter. The original collar looks like a M10-1 (my best guess) thread and the replacement is an M8-0.75 and it only comes with one mounting nut. PCB mounted pots in my Marshall requires two, one for each side of the panel to be sturdy. The original Marshall nuts are obviously to large, so I was forced to buy additional nuts to mount the pots in my amp. KEEP ALL THAT IN MIND WHEN ORDERING!

Jose Gutierrez Herrera - November 28th, 2019
4 out of 5

Los potenciometros estan muy bien,lo malo es que solo vienen con una sola tuerca y se necesitan dos para que queden bien

Rich A - October 28th, 2018
5 out of 5

Replaced a defective master volume pot on my Marshall Artist 4203 Combo with one of these. Same size and value as original, fit perfectly. Only negative is the threaded shaft is a smaller diameter than the original. Two washers are supplied, but only one locknut. You need two. A trip to Home Depot solved this problem. Otherwise, very happy to be able to repair my 31 year old amp. Thank you Antique Electronic Supply !!!

allen.gordon - December 9th, 2015
5 out of 5

Excellent replacement for a JCM800 Model 2210 I recently repaired!

It WOULD be nice if there was a link to purchase extra nuts as 2 are required to set each properly.

allen.gordon - December 9th, 2015
5 out of 5

Excellent replacement for a JCM800 Model 2210 I recently repaired!

It WOULD be nice if there was a link to purchase extra nuts as 2 are required to set each properly.

allen.gordon - December 9th, 2015
5 out of 5

Excellent replacement for a JCM800 Model 2210 I recently repaired!

It WOULD be nice if there was a link to purchase extra nuts as 2 are required to set each properly.

Ray - October 25th, 2015
5 out of 5

Product was satisfactory

Joe Rampani - October 22nd, 2014
5 out of 5

was a great value. Will buy again