Potentiometer - Audio, 16mm, Marshall Style
Audio, 16mm, 7mm bushing, knurled split shaft.
RoHS Compliant
SKU:
R-VXA-M-16
Item ID:
003668
Application:
Shaft:
Taper:
Termination Style:
Type/Size:
| Resistance | Our Part Number | UPC/EAN |
|---|---|---|
| 1 MΩ | R-V1MA-M-16 | 609722158411 |
| 100 kΩ | R-V100KA-M-16 | 609722158282 |
| Body Depth | 9.2 mm | ||
| Body Width | 17mm | ||
| Bushing Length | 6.5 mm | ||
| Bushing Thread | M7X0.75 | ||
| C.C Torque | 100-350 gf-cm | ||
| Hex Nut Thickness | 2 mm | ||
| Hex Nut Width | 10 mm | ||
| Insulation Resistance | ＞100 MΩ at 500VDC | ||
| Life | 15,000 cycles | ||
| Manual Soldering Max Temp for 3 sec. | 300 °C | ||
| Max. Working Voltage | 150V | ||
| Max Rotational Stopper Strength | 8Kgf | ||
| Operating (Useable) Temperature | -10 °C to +70 °C | ||
| Rated Wattage (Power) | 0.1W | ||
| Rotational Torque | 20-300 gf-cm | ||
| Shaft Diameter | 6.35 mm | ||
| Sliding Noise | <47 mV | ||
| Tap Residual Resistance | ≤20 Ω | ||
| Taper | Audio | ||
| Tolerance | 1 MΩ version | R-V1MA-M-16 | ±30% |
| 100 kΩ version | R-V100KA-M-16 | ± 20% | |
| Total Rotational Angle | 300° ±5° | ||
| Total Shaft Length | 20 mm | ||
| Washer I.D. | 7.2 mm | ||
| Washer O.D. | 12 mm | ||
| Washer Thickness | 0.4 mm | ||
| Withstand Voltage | 500 VAC for 1 min. |
| Packaging Dimensions | 1.3 in. × 1 in. × 0.8 in. | |
| Weight (Packaging) | 0.013 lbs. |
| R-V100KA-M-16 - 100 kΩ version | Body Depth | 9.2 mm |
| Body Width | 17mm | |
| Bushing Length | 6.5 mm | |
| Bushing Thread | M7X0.75 | |
| C.C Torque | 100-350 gf-cm | |
| Hex Nut Thickness | 2 mm | |
| Hex Nut Width | 10 mm | |
| Insulation Resistance | ＞100 MΩ at 500VDC | |
| Life | 15,000 cycles | |
| Manual Soldering Max Temp for 3 sec. | 300 °C | |
| Max. Working Voltage | 150V | |
| Max Rotational Stopper Strength | 8Kgf | |
| Operating (Useable) Temperature | -10 °C to +70 °C | |
| Rated Wattage (Power) | 0.1W | |
| Rotational Torque | 20-300 gf-cm | |
| Shaft Diameter | 6.35 mm | |
| Sliding Noise | <47 mV | |
| Tap Residual Resistance | ≤20 Ω | |
| Taper | Audio | |
| Tolerance | ± 20% | |
| Total Rotational Angle | 300° ±5° | |
| Total Shaft Length | 20 mm | |
| Washer I.D. | 7.2 mm | |
| Washer O.D. | 12 mm | |
| Washer Thickness | 0.4 mm | |
| Withstand Voltage | 500 VAC for 1 min. | |
| R-V1MA-M-16 - 1 MΩ version | Body Depth | 9.2 mm |
| Body Width | 17mm | |
| Bushing Length | 6.5 mm | |
| Bushing Thread | M7X0.75 | |
| C.C Torque | 100-350 gf-cm | |
| Hex Nut Thickness | 2 mm | |
| Hex Nut Width | 10 mm | |
| Insulation Resistance | ＞100 MΩ at 500VDC | |
| Life | 15,000 cycles | |
| Manual Soldering Max Temp for 3 sec. | 300 °C | |
| Max. Working Voltage | 150V | |
| Max Rotational Stopper Strength | 8Kgf | |
| Operating (Useable) Temperature | -10 °C to +70 °C | |
| Rated Wattage (Power) | 0.1W | |
| Rotational Torque | 20-300 gf-cm | |
| Shaft Diameter | 6.35 mm | |
| Sliding Noise | <47 mV | |
| Tap Residual Resistance | ≤20 Ω | |
| Taper | Audio | |
| Tolerance | ±30% | |
| Total Rotational Angle | 300° ±5° | |
| Total Shaft Length | 20 mm | |
| Washer I.D. | 7.2 mm | |
| Washer O.D. | 12 mm | |
| Washer Thickness | 0.4 mm | |
| Withstand Voltage | 500 VAC for 1 min. |
 Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
How long is the threaded bushing on this pot? Thanks!
Asked by Anonymous on September 2nd, 2016.
September 2nd, 2016
Staff Member
Hi, the threaded bushing is 0.3 inches.
Product Reviews
It's exactly what I needed.
used this part in a small mixer, perfect fit, high quality!!
I searched for a replacement volume potentiometer for a Hartke A-70 bass amp and found this one that seemed identical with one exception. That exception was the length of the splined portion of the shaft. I took a chance and ordered two. They were in fact identical in every other way, and were undoubtedly made by the same manufacturer (even though no brand name appears on either the original or the replacements). I carefully trimmed the aluminum shaft down to the required length (to fit the knob and position it precisely). The end result is perfect, and I am very happy with the performance of the repaired amp.
I'm really happy with the tech help prior to my order, the time they took with me in helping to match up what i need to what is currently available. Fast shipping and good prices.