Potentiometer - Audio, D Shaft, 16mm, Snap-In, Bracket
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Starting at: $1.25
In Stock
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included
RoHS Compliant
SKU:
R-VSN-XA-DS
Item ID:
003918
Application:
Shaft:
Taper:
Termination Style:
Type/Size:
Accessory Items:
| Resistance | Our Part Number | UPC/EAN |
|---|---|---|
| 2 kΩ | R-VSN-2KA-DS | 609722159876 |
| 50 kΩ | R-VSN-50KA-DS | 609722159890 |
| Body Depth | 9.2 mm | ||
| Body Width | 20 mm | ||
| Bushing Length | 6.5 mm | ||
| Bushing Thread | M7X0.75 | ||
| C.C Torque | 100-350 gf-cm | ||
| Hex Nut Thickness | 2 mm | ||
| Hex Nut Width | 10 mm | ||
| Insulation Resistance | ＞100 MΩ at 500VDC | ||
| Life | 15,000 cycles | ||
| Manual Soldering Max Temp for 3 sec. | 300 °C | ||
| Max. Working Voltage | 150V | ||
| Max Rotational Stopper Strength | 8Kgf | ||
| Operating (Useable) Temperature | -10 °C to +70 °C | ||
| Rated Wattage (Power) | 0.1W | ||
| Rotational Torque | 20-300 gf-cm | ||
| Shaft Diameter | 6 mm | ||
| Sliding Noise | <47 mV | ||
| Tap Residual Resistance | 2 kΩ version | R-VSN-2KA-DS | ≤10 Ω |
| 50 kΩ version | R-VSN-50KA-DS | ≤20 Ω | |
| Taper | Audio | ||
| Tolerance | ± 20% | ||
| Total Rotational Angle | 300° ±5° | ||
| Total Shaft Length | 20 mm | ||
| Washer I.D. | 7.2 mm | ||
| Washer O.D. | 12 mm | ||
| Washer Thickness | 0.4 mm | ||
| Withstand Voltage | 500 VAC for 1 min. |
| Packaging Dimensions | 1.6 in. × 1 in. × 0.9 in. | |
| Weight (Packaging) | 0.02 lbs. |
| R-VSN-2KA-DS - 2 kΩ version | Body Depth | 9.2 mm |
| Body Width | 20 mm | |
| Bushing Length | 6.5 mm | |
| Bushing Thread | M7X0.75 | |
| C.C Torque | 100-350 gf-cm | |
| Hex Nut Thickness | 2 mm | |
| Hex Nut Width | 10 mm | |
| Insulation Resistance | ＞100 MΩ at 500VDC | |
| Life | 15,000 cycles | |
| Manual Soldering Max Temp for 3 sec. | 300 °C | |
| Max. Working Voltage | 150V | |
| Max Rotational Stopper Strength | 8Kgf | |
| Operating (Useable) Temperature | -10 °C to +70 °C | |
| Rated Wattage (Power) | 0.1W | |
| Rotational Torque | 20-300 gf-cm | |
| Shaft Diameter | 6 mm | |
| Sliding Noise | <47 mV | |
| Tap Residual Resistance | ≤10 Ω | |
| Taper | Audio | |
| Tolerance | ± 20% | |
| Total Rotational Angle | 300° ±5° | |
| Total Shaft Length | 20 mm | |
| Washer I.D. | 7.2 mm | |
| Washer O.D. | 12 mm | |
| Washer Thickness | 0.4 mm | |
| Withstand Voltage | 500 VAC for 1 min. | |
| R-VSN-50KA-DS - 50 kΩ version | Body Depth | 9.2 mm |
| Body Width | 20 mm | |
| Bushing Length | 6.5 mm | |
| Bushing Thread | M7X0.75 | |
| C.C Torque | 100-350 gf-cm | |
| Hex Nut Thickness | 2 mm | |
| Hex Nut Width | 10 mm | |
| Insulation Resistance | ＞100 MΩ at 500VDC | |
| Life | 15,000 cycles | |
| Manual Soldering Max Temp for 3 sec. | 300 °C | |
| Max. Working Voltage | 150V | |
| Max Rotational Stopper Strength | 8Kgf | |
| Operating (Useable) Temperature | -10 °C to +70 °C | |
| Rated Wattage (Power) | 0.1W | |
| Rotational Torque | 20-300 gf-cm | |
| Shaft Diameter | 6 mm | |
| Sliding Noise | <47 mV | |
| Tap Residual Resistance | ≤20 Ω | |
| Taper | Audio | |
| Tolerance | ± 20% | |
| Total Rotational Angle | 300° ±5° | |
| Total Shaft Length | 20 mm | |
| Washer I.D. | 7.2 mm | |
| Washer O.D. | 12 mm | |
| Washer Thickness | 0.4 mm | |
| Withstand Voltage | 500 VAC for 1 min. |
 Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
Is this a Fender pot?
Asked by Anonymous on February 21st, 2019.
February 28th, 2019
Staff Member
This is not a Fender brand potentiometer, these are simply a generic replacement part.
1 answers
How long are the solder legs on this pot?...I'm replacing a PC mount volume control pot on a vintage AM radio, so the height off of the board is important...My existing pot legs are 1/2"....Thanks...
Asked by Anonymous on March 24th, 2019.
March 26th, 2019
Staff Member
They are 0.16" (4mm) long.
Customers who purchased this item also bought
Related Products
Product Reviews
Worked great for a Fender deluxe 112 solid state guitar amp.
I needed a replacement for a broken Bandwidth Control on a Symetrix SE-400 Dual 4-Band Parametric Equalizer. Apart from the support bracket, this was a form-fit-function replacement. The D-Shat was 180 deg opposite that of the other pots, but the push-on Selco knobs have a snap-in color cap with indicator line, allowing re-fitting to align it. The brackets were lopped off with a Foredom hand grinder using a cut-off disc to score it, flexed it to snap off, ground down the sharp edges. Back in business!
The part is a perfect fit replacement for those goofy solid-state Fender amps from the 1990's.