Potentiometer - Linear, 16mm, Marshall Style
Marshall style linear taper 16mm potentiometer with 7mm bushing. Knurled split shaft.
SKU:
R-VXL-M-16
Item ID:
003755
Application:
Brand:
Marshall Style
Shaft:
Taper:
Termination Style:
Type/Size:
RoHS Compliant
Resistance | Our Part Number | UPC/EAN |
---|---|---|
4.7 kΩ | R-V4D7KL-M-16 | 609722158756 |
10 kΩ | R-V10KL-M-16 | 609722158367 |
22 kΩ | R-V22KL-M-16 | 609722158497 |
50 kΩ | R-V50KL-M-16 | 609722164030 |
100 kΩ | R-V100KL-M-16 | 609722158329 |
220 kΩ | R-V220KL-M-16 | 609722158459 |
Body Depth | 9.2 mm | |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
Packaging Dimensions | 1.3 in. × 1 in. × 0.8 in. | |
Weight (Packaging) | 0.015 lbs. |
R-V4D7KL-M-16 - 4.7 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V10KL-M-16 - 10 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V22KL-M-16 - 22 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V50KL-M-16 - 50 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V100KL-M-16 - 100 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V220KL-M-16 - 220 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
![]() | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
Does your 50k potentiometer R-V50KL-M-16 have the damped rotation that makes it harder to turn, or does it turn freely?
Asked by Anonymous on February 3rd, 2017.
This pot has some tension when you turn it.
1 answers
Will this work as the gain pot on a JCM900?
Asked by Anonymous on February 3rd, 2017.
We are unsure if this will work in your amp. If you pull the pot out of your amp, you should see some lettering at the top of the pot. It should either start with the letter B or A. B is a lineal pot and A is an audio taper pot. The next number will tell you the resistance such as 1M (1Meg), 10K (10 kiloohms), etc. With these characters you will be able to determine exactly what is in your JCM 900.
1 answers
Will this work for the R1 output of a Lexicon PCM 41?
Asked by Anonymous on March 3rd, 2018.
The best thing to do is remove the volume pot and do a visual comparison with this pot. We can also compare specs if you need measurements.
1 answers
Does it matter if the "M 1M ohm B 6D C" pot volume control for my Roland JC is audio or linear taper? Thanks!
Asked by Anonymous on March 26th, 2021.
Some applications have a more ideal taper and to understand the difference between the two, you can read our tech article on the topic: https://www.tubesandmore.com/tech-articles/potentiometer-types
Product Reviews
Perfect
I used the pot to repair one of my DOD Grunge pedals. I knew it wasn't a direct physical replacement, it was even better as it allowed me to use the original post PC leads w/o soldering on the old pc board. Always great service and prices from AES.