Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Dunlop, Wah, 10 kΩ linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10 kΩ Linear
  • Gear included
$17.95
Potentiometer - CTS, 10K, Linear, Bias Trimmer, Screw
CTS 10K linear bias potentiometer. This panel mount trimpot is used in many Fender® amplifiers.

Please note: This potentiometer does not include the washer and nut. If you would like to purchase the washer and nut, see our part number R-VNUT-38
$4.05
Potentiometer - Marshall, 10kΩ, Linear, Dual, 16mm
10K dual linear, 16mm, 7mm bushing.
$3.95
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - Alpha, Linear, Knurled Shaft, Right Angle, 16mm, Dual, 10kΩ
10kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.90
Potentiometer - Alpha, Linear, Knurled Shaft, Right Angle, 16mm
Linear taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$0.99
Potentiometer - Alpha, Linear, Solid Shaft, 16mm
16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Linear
Starting at $0.99
Potentiometer - Alpha, Linear, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 3.8 mm (0.150”)
  • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.15
Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm
Alpha Mini Pots with solid shaft and long PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
Starting at $0.85
Potentiometer - Alpha, Linear, Solid Shaft, Long PC, 16mm
Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Alpha, Linear, Solid Shaft, 16mm, Dual
Dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Linear
$1.30
Potentiometer - Alpha, Linear, 9mm, Right Angle
Linear taper, right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
Potentiometer - Alpha, Linear, 9mm, Vertical
Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
Potentiometer - Alpha, Linear, 9mm, Vertical, 11 Detents
Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter featuring 11 detents across the rotation. The 11 detent versions are useful for builds where 1-10 settings are commonly used or if the pot is used as a rotary switch along with a microcontroller. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included. See R-VAV-A100K-11DET for an audio taper version.
$2.05
Potentiometer - Alpha, Linear, 9mm, Vertical, Center Notch
Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter and a center notch (detent). The center notch is useful for builds where the center position of the pot is commonly used such as panners or EQ controls. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.95
Potentiometer - Alpha, Linear, 9mm, Vertical, D-Shaft
Linear taper, vertical mount, Alpha pots with a 6mm D shaft. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
Potentiometer - Alpha, Linear, 9mm, Vertical, Dual Gang
Linear taper, vertical mount, dual gang Alpha pots with a 6.35mm shaft diameter. Dual gang pots are useful for stereo controls and other circuits requiring two separate pots moving in tandem. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included. See R-VAV-A100K-DUAL for an audio taper version.
$2.55
Potentiometer - Alpha, Linear, 9mm, Vertical, Knurled Shaft
Linear taper, vertical mount, Alpha pots with a 6mm T18 knurled shaft. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
Potentiometer - Alpha, Linear, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55
Potentiometer - Bourns, Linear, Solid Shaft
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Starting at $2.65
Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ⅜"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - GØRVA, Linear, 16mm, Right Angle PCB, Solid Shaft
High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Right-angle PCB mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45
Potentiometer - GØRVA, Linear, 16mm, Solder Lug, Solid Shaft
High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45