You are here

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
Check out our Tech Corder articles on pots, including Potentiometer Types.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
R-VX-S1Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT

The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.


$24.95
$22.21
You save: 11%
Click to read more
R-VC500KA-DPDT-LSPotentiometer - CTS, 500kΩ, Audio, Knurled, .75" Bushing, DPDT
Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
$7.95
$7.08
You save: 11%
Click to read more
R-VCXA-DPDTPotentiometer - CTS, Audio, Knurled Shaft, .375" Bushing, DPDT
Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:

  • 500 kΩ pots are commonly used when wiring humbuckers.
  • 250 kΩ pots are commonly used when wiring single-coil pickups
  • 500 kΩ long-shaft pots are commonly used when wiring carved top solid body guitars
$6.95
$6.19
You save: 11%
Click to read more
R-VPP-XA-SPLITPotentiometer - Alpha, Audio, Knurled Shaft, DPDT, 7mm Bushing

Push pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.


$3.25
$2.89
You save: 11%
Click to read more
R-VPSH-500KAPotentiometer - 500kΩ, Audio, Knurled Shaft, DPDT, Push-Push

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.


$9.80
$8.72
You save: 11%
Click to read more
R-VPSH-500KA-LPotentiometer - 500kΩ, Audio, Knurled Long, DPDT, Push-Push

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .75" bushing length, .38"-.52" shaft length.


$11.30
$10.06
You save: 11%
Click to read more
R-VCXA-SP-LPotentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing

CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.



  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer

$4.95
$4.41
You save: 11%
Click to read more
R-VCXL-SP-LPotentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing

CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.



  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer

$4.95
$4.41
You save: 11%
Click to read more
R-VAMA-SSPotentiometer - Alpha, Audio, Solid Shaft, 16mm

Miniature solid shaft audio potentiometers.


$1.25
Starting at $1.11
You save: 11%
Click to read more
R-VB-APotentiometer - Bourns, Audio, Solid Shaft, 24mm
Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
$2.40
Starting at $2.14
You save: 11%
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Potentiometers