You are here

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
Check out our Tech Corder articles on pots, including Potentiometer Types.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
R-VX-S1Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT

The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.


$24.95
Click to read more
R-VC500KA-DPDT-LSPotentiometer - CTS, 500kΩ, Audio, Knurled, .75" Bushing, DPDT

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:



  • 500K pots are commonly used when wiring humbuckers.
  • 250K pots are commonly used when wiring single-coil pickups
  • 500K long-shaft pots are commonly used when wiring carved top solid body guitars

$7.95
Click to read more
R-VCXA-DPDTPotentiometer - CTS, Audio, Knurled Shaft, .375" Bushing, DPDT

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:



  • 500K pots are commonly used when wiring humbuckers.
  • 250K pots are commonly used when wiring single-coil pickups
  • 500K long-shaft pots are commonly used when wiring carved top solid body guitars

$6.95
Click to read more
R-VPP-XA-SPLITPotentiometer - Alpha, Audio, Knurled Shaft, DPDT, 7mm Bushing

Push pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.


$3.25
Click to read more
R-VPSH-250KAPotentiometer - 250kΩ, Audio, Knurled Shaft, Push-Push, DPDT

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.


$9.80
Click to read more
R-VPSH-500KAPotentiometer - 500kΩ, Audio, Knurled Shaft, DPDT, Push-Push

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.


$9.80
Click to read more
R-VPSH-500KA-LPotentiometer - 500kΩ, Audio, Knurled Long, DPDT, Push-Push

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .75" bushing length, .38"-.52" shaft length.


$11.30
Click to read more
R-VCXA-SP-LPotentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing

CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.



  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer

$4.95
Click to read more
R-VCXL-SP-LPotentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing

CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.



  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer

$4.95
Click to read more
R-VC-KA-SPPotentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing

The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.



Includes:



  • 1 nut
  • 1 lock washer

Starting at $4.45
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Potentiometers