Potentiometers

Original Fender® chassis-mount hum balance potentiometer, 100 ohm.

• 100-ohm potentiometer used for hum balance control
• 1/4" threaded brass bushing for mounting to amplifier chassis
• Adjustable level control (flat-head screwdriver only)
• Mounting nut and washer included
• Adjustable from both the front and back face of pot
• Used for '65 Twin Reverb®, Machete™ and Vibrasonic amplifiers (1992-present) plus others

16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Linear

500kΩ 24mm audio taper pot from Alpha with an SPST rotary switch commonly used for ON/OFF settings on volume controls. This pot has a 6.25mm (0.25”) solid shaft and solder lug terminals.

24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.

• DPDT Push-Push switch
• ¼" split knurled shaft
• Linear taper
• 3/8-32 threads
• 16mm body diameter (widest point on switch body 17.8mm)
• 75" bushing length
• 38"-.52" shaft length.

Standard fit for most vintage American made tube amps.

20kΩ W taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: W

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.

• 24mm diameter, single-turn potentiometers
• Carbon film element
• Metal shaft and bushing
• Panel mount
• Ear-lug solder terminals
• 6mm diameter slotted-end solid shaft
• 10mm bushing length
• 10mm shaft length (extended past bushing)
• Linear Taper

CTS reverse audio potentiometer, 50K.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: ¼"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Aluminum - Solid Shaft

16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Audio (Log)

Dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Linear

24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.

Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push

• DPDT Push-Push switch
• ¼" split knurled shaft
• Linear taper
• 3/8-32 threads
• 16mm body diameter (widest point on switch body 17.8mm)
• .40" bushing length
• 38"-.52" shaft length.

Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.

Reverse audio taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Reverse Audio (Anti-Log)

CTS J Taper audio potentiometer.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: 3/8"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Brass - Solid Shaft

Push pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.

100kΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Audio (Log)

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.

• 24mm diameter, single-turn potentiometers
• Carbon film element
• Metal shaft and bushing
• Panel mount
• Ear-lug solder terminals
• 6mm diameter slotted-end solid shaft
• 10mm bushing length
• 10mm shaft length (extended past bushing)
• Audio Taper