Potentiometers

Reverse audio taper (antilog), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

W taper, vertical mount, 20kΩ Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

24 mm carbon composition. 300° rotation.1/4W, 500VDC rating. Audio taper. ¼" diameter shaft.

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.

Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.

Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.

Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features:

• Carbon element
• 6mm Solid Shaft
• 3/8" Bushing Width
• 3/8" Bushing Length
• Tolerance: ±20 %
• Power Rating: 0.1 watt
• Maximum Operating Voltage: 150 V
• Bourns Series Number: PDB181-GT

Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, SolidShaft, Solder Lugs.

• 17mm Body Diameter
• ¼ watt
• 300° rotation
• 6mm solid shaft
• ⅜" Bushing Length
• Tolerance: ±20 %
• Maximum Operating Voltage: 150V

Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼ watt, 300° rotation. 6mm shaft diameter. Solder lugs. 3/8" bushing.

• Body Diameter: 24 mm
• Power Rating 1/3 watt
• Bushing Diameter: 3/8" (Threading: 3/8-32)
• Bushing Length: ⅜"
• Shaft Diameter: ¼"
• Shaft Length: 3/8"
• Shaft Material: Aluminum - Solid Shaft

CTS Linear potentiometer, 3/8 in. bushing length, solid shaft, 3/8 in. bushing diameter.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: ⅜"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Aluminum - Solid Shaft
• Includes (1) Nut and (1) Lock Washer

Audio taper, SPST push-pull, solder lugs, 3/8" bushing, 24 mm

CTS reverse audio potentiometer, 50K.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: ¼"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Aluminum - Solid Shaft

CTS J Taper audio potentiometer.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: 3/8"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Brass - Solid Shaft

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.

• 250K Audio taper
• Solid shaft
• Proprietary technology
• Resistant to dust and corrosion

Original Fender, Audio potentiometer, concentric, 250kΩ / 500kΩ, solid shaft.

• Mounting hardware not included
• Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars
• Will not work with push-on style control knobs; set screw mounting knobs only

High-quality pcb mount audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Right-angle PCB mount
• Audio taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.

High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Audio taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Right-angle PCB mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features

• ⅜ in. Bushing
• Panel Mount
• Linear Taper
• Made in UK
• Life Expectancy of >20,000 cycles (tested at 30 times per minute)
• Conductive polymer (plastic) track (over twice the life of carbon tracks)
• Rotation angle: 300° ±5°
• Tolerance on Rated Resistance: ± 20%

High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. The 350K resistance with an reverse audio (antilog) taper is perfect for germanium Fuzzrite builds. Includes mounting nut and lock washer. Features

• ⅜ in. Bushing
• Panel Mount
• Reverse Audio (Antilog) Taper
• Made in UK
• Life Expectancy of >20,000 cycles (tested at 30 times per minute)
• Conductive polymer (plastic) track (over twice the life of carbon tracks)
• Rotation angle: 300° ±5°
• Tolerance on Rated Resistance: ± 20%

High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features

• ⅜ in. Bushing
• Panel Mount
• Audio (Log) Taper
• Made in UK
• Life Expectancy of >20,000 cycles (tested at 30 times per minute)
• Conductive polymer (plastic) track (over twice the life of carbon tracks)
• Rotation angle: 300° ±5°
• Tolerance on Rated Resistance: ± 20%