Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Alpha, Audio, 9mm, Right Angle
Audio taper (log), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.55
Potentiometer - GØRVA, Linear, 16mm, Right Angle PCB, Solid Shaft
High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Right-angle PCB mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45
Potentiometer - Alpha, 1MΩ, Audio, 7mm Bushing, DPDT Switch
Push-pull pot. 7mm bushing. 1 meg, ¼" solid metal shaft. Used in many Fender® applications.
$3.30
Solder Lug - ⅜” Hole, Locking Washer
Angled solder terminal on a locking washing for ⅜” bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other ⅜” bushing part.
$1.50
package of 10
Potentiometer - Dunlop, Super Pot, Split Shaft
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • Audio taper
  • 24-knurl split shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$13.95
Potentiometer - Song Huei, Audio, 9mm, Tall
Audio taper, vertical mount, Song Huei pots with a 6mm shaft. These 9mm pots are popular in DIY guitar pedals, modular synthesizers, and other projects where space is limited. The knurled shaft features a painted indicator line so no knob is required. These tall versions have a 17mm shaft length and a total height of 25mm. For linear taper versions, see R-VSHL-BX. For center notched, linear taper versions, see R-VSHL-BX-CN.
$0.95
Potentiometer - Alpha, Audio, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 3.8 mm (0.150”)
  • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.25
Potentiometer - Audio, Knurled Shaft, Push-Push, DPDT
DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.
$10.95
Potentiometer - Fender®, Audio, for Blues Junior
Genuine Fender® replacement potentiometers with audio tapers for Blues Junior models.
  • 250 kΩ - Treble tone control
  • 1 MΩ - Volume

For linear taper pots for the BLues Junior, please see R-VBJ-XL.
Starting at $3.50
Potentiometer - Alpha, Linear, Solid Shaft, Long PC, 16mm
Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Marshall, Audio, 11mm, PC Mount, Square
Audio taper square body PC mount potentiometer by Marshall. Body width = 11mm
See R-VKG-XL for the Linear taper equivalent
$4.95
Partially Out of Stock
Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm
Audio taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$0.99
Potentiometer - Precision Electronics, Audio, Slotted Shaft
Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
Starting at $25.35
Potentiometer - Alpha, 1MΩ, Audio, Switch
Alpha, 1 meg, switched potentiometer. (SPST) 24mm body, 13/8" long x ¼" diameter solid shaft.
$3.55
Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
$0.69
Circuit - PMT, Variable Treble Bleed
The V-Treb Variable Treble Bleed Circuit attaches to the bottom of any volume pot and corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound.
$10.35
Potentiometer - Reverse Audio, Solid Shaft, 16mm, Snap-In
Reverse Audio (30C). 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.79
Potentiometer - Reverse Audio, D Shaft, 16mm, Snap-In, Bracket
Reverse Audio (30C). 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40
Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.90
Potentiometer - Fender, dual Audio, concentric solid shaft
Original Fender, Audio potentiometer, concentric, 250kΩ / 500kΩ, solid shaft.
  • Mounting hardware not included
  • Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars
  • Will not work with push-on style control knobs; set screw mounting knobs only
$7.95
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.85
Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95
Potentiometer - Audio, D Shaft, 16mm, Snap-In, Bracket
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included
$1.40