Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Omeg, Audio, 20mm, Panel Mount, 470KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features
- ⅜ in. Bushing
- Panel Mount
- Audio (Log) Taper
- Made in UK
- Life Expectancy of >20,000 cycles (tested at 30 times per minute)
- Conductive polymer (plastic) track (over twice the life of carbon tracks)
- Rotation angle: 300° ±5°
- Tolerance on Rated Resistance: ± 20%
$4.95
Potentiometer - Marshall, Linear, 11mm, PC Mount, Square
Linear taper square body PC mount potentiometer by Marshall. Body width = 11mm
See R-VKG-XA for the Audio taper equivalent
See R-VKG-XA for the Audio taper equivalent
$4.95
Potentiometer - CTS, Audio, Solid Shaft
- Body Diameter: 24 mm
- Power Rating 1/3 watt
- Bushing Diameter: 3/8" (Threading: 3/8-32)
- Bushing Length: ⅜"
- Shaft Diameter: ¼"
- Shaft Length: 3/8"
- Shaft Material: Aluminum - Solid Shaft
$4.95
Potentiometer - Peavey, Linear, Spider
Peavey Linear Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
$4.95
Potentiometer - Peavey, 50K, Linear, Wire Wound, 30 Detents
50K Linear, wire wound, XL shaft. 30 detents evenly-spaced throughout its rotation. Mounting hardware not included.
$4.95
Potentiometer - Peavey, Audio, Spider
Peavey Audio Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
Starting at $4.95
Potentiometer - CTS, 50kΩ, Reverse Audio, Solid Shaft
CTS reverse audio potentiometer, 50K.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: ¼"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Aluminum - Solid Shaft
$4.95
Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
- Meets UL 94V-0
- Pocket clip
- For use on most trimmer shafts/rotors
- Recessed end for use with extended shafts
- RoHS compliant
$4.95
Potentiometer - Marshall, Audio, 11mm, PC Mount, Square
Audio taper square body PC mount potentiometer by Marshall. Body width = 11mm
See R-VKG-XL for the Linear taper equivalent
See R-VKG-XL for the Linear taper equivalent
$4.95
Potentiometer - Omeg, Linear, 20mm, Panel Mount, 100KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes two mounting nuts and one lock washer. Features
- ⅜ in. Bushing
- PCB Through Mount
- Linear Taper
- Made in UK
- Life Expectancy of >20,000 cycles (tested at 30 times per minute)
- Conductive polymer (plastic) track (over twice the life of carbon tracks)
- Rotation angle: 300° ±5°
- Tolerance on Rated Resistance: ± 20%
$4.95
Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer, 3/8 in. bushing length, solid shaft, 3/8 in. bushing diameter.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: ⅜"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Aluminum - Solid Shaft
- Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - Fender®, 250kΩ, Pan, MN Taper, Solid Shaft
Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft (1/4") with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$4.95
Potentiometer - Omeg, Linear, 20mm, Panel Mount, 1KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features
- ⅜ in. Bushing
- Panel Mount
- Linear Taper
- Made in UK
- Life Expectancy of >20,000 cycles (tested at 30 times per minute)
- Conductive polymer (plastic) track (over twice the life of carbon tracks)
- Rotation angle: 300° ±5°
- Tolerance on Rated Resistance: ± 20%
$4.95
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.85
Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
$4.45
package of 12
Washer - Fender®, Lock Type, for Potentiometers
Lock washer for Fender® potentiometers. Package of 12.
$4.45
package of 12
Potentiometer - Fender®, 1MΩ, J Taper, Control, Snap-In
Original Fender® snap-in, control potentiometer, 1 meg, J taper.
$4.15
Potentiometer - CTS, 10K, Linear, Bias Trimmer, Screw
CTS 10K linear bias potentiometer. This panel mount trimpot is used in many Fender® amplifiers.
Please note: This potentiometer does not include the washer and nut. If you would like to purchase the washer and nut, see our part number R-VNUT-38
Please note: This potentiometer does not include the washer and nut. If you would like to purchase the washer and nut, see our part number R-VNUT-38
$4.05
Potentiometer - Marshall, 22kΩ, Linear, Bias, for JMP
22kΩ linear taper. Used as bias / trim potentiometer for JMP.
For a same-brand generic replacement, see R-V25KV-BP.
For a same-brand generic replacement, see R-V25KV-BP.
$3.95
Out of Stock
Potentiometer - CTS, 100kΩ, Linear
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.95
Potentiometer - CTS, 3MΩ, Reverse Audio
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.95
Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.90
Potentiometer - Peavey, 50kΩ, Linear, Slide, 45mm travel
50 kΩ linear slide potentiometer by Peavey. Travel length is 45 mm
$3.75