You are here

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
Check out our Tech Corder articles on pots, including Potentiometer Types.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
R-V500K-SSPotentiometer - Fender®, 500kΩ, Audio, Solid Shaft

500K ohm (audio taper), solid shaft. Made in Taiwan.


$6.25
Click to read more
R-V250K-SPPotentiometer - Fender®, 250kΩ, Audio, Knurled Shaft

250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.


$6.75
Click to read more
R-VXA-SEPotentiometer - Audio, Knurled Shaft, Sealed, 24mm

Audio, knurled shaft, sealed, 24mm.


$6.80
Click to read more
R-V500K-SPPotentiometer - Fender®, 500kΩ, Audio, Knurled Shaft

500k ohm, audio taper. Split Shaft


$6.95
Click to read more
R-VCXA-DPDTPotentiometer - CTS, Audio, Knurled Shaft, .375" Bushing, DPDT

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:



  • 500K pots are commonly used when wiring humbuckers.
  • 250K pots are commonly used when wiring single-coil pickups
  • 500K long-shaft pots are commonly used when wiring carved top solid body guitars

$6.95
Click to read more
R-VPV-10KA-100Potentiometer - Peavey, 10kΩ, Audio, Slide, 100mm

10K Audio, 100mm. Pin spacing: 4.870" x 0.191".


$7.50
Click to read more
R-VB2Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 1/4" shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.


$7.95
Click to read more
R-VB2-500KAPPSPPotentiometer - Bourns, Audio, Knurled, Dual Mini, Push-Pull, 500K

Bourns Mini Carbon Element, DPDT Push Pull Switch, Dual Audio, Split Shaft. ¼" watt, 300° rotation. Solder lugs.



  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Bourns Series Number PDB183-GTR21

$7.95
Click to read more
R-VC500KA-DPDT-LSPotentiometer - CTS, 500kΩ, Audio, Knurled, .75" Bushing, DPDT

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:



  • 500K pots are commonly used when wiring humbuckers.
  • 250K pots are commonly used when wiring single-coil pickups
  • 500K long-shaft pots are commonly used when wiring carved top solid body guitars

$7.95
Click to read more
R-VF-250K-500KPotentiometer - Fender, Audio, concentric Solid Shaft, 250k/500kΩ

Original Fender, Audio potentiometer ,Concentric, Solid Shaft, Resistance: 250/500k Ohm



  • Body Diameter 0.95”
  • Body Depth: . 0.87”
  • Bushing Diameter: 3/8”
  • Bushing Length: 1/4”
  • Shaft Diameter: 0.18”/0.26”
  • Shaft Length: 0.56"
  • Shaft Type: Concentric Solid Shaft
  • 300° rotation
  • Hardware not included

$8.50
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Potentiometers