Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.85
Potentiometer - Fender, 50kΩ, Audio, Split Shaft, ¼" Bushing
Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25
Potentiometer - Audio, Knurled Shaft, Sealed, 24mm
Audio taper, knurled split shaft, sealed body 24mm potentiometer
$5.78
Save 15%
Originally: $6.80
Potentiometer - Fender®, 250kΩ, Knurled Shaft, Push-Pull
250K ohm (audio taper), push-pull DPDT, split shaft. Made in Korea.
$7.45
Potentiometer - Fender®, 250kΩ, Knurled Shaft, No Load
250K ohm. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors.
$7.45
Potentiometer - Fender®, 250kΩ, Audio, Knurled Shaft
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
$6.95
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$5.45
Potentiometer - Bourns, Audio, Knurled Shaft, 24mm
Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$12.95
Potentiometer - Bourns, Audio, Knurled Shaft, Mini
Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Series Number: PDB181-GTR
$3.05
Potentiometer - Bourns, Audio, Knurled Shaft, ⅜" Bushing
Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.377" L x 0.625" D
  • 300° rotation
  • Power Rating: ¼ watt
  • Tolerance: 10 %
  • ¼" Fine Knurled Split Shaft
  • ⅜" Bushing Length
  • J Hooks
  • Specifically designed for vintage guitars
  • Very Low Noise
Starting at $17.49
Potentiometer - Bourns, Audio, Knurled Shaft
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$5.45
Potentiometer - Bourns, 500kΩ Audio, Knurled, Dual Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Dual Audio, Split Shaft. ¼" watt, 300° rotation. Solder lugs.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Bourns Series Number PDB183-GTR21
$7.95
Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
$8.80
Potentiometer - Bourns, Dual MN Taper, Knurled Shaft
Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.79
Potentiometer - Bourns, Audio, Knurled Shaft, Push-Pull, Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
Starting at $7.95
Potentiometer - Alpha, 300kΩ, Linear, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. 300K linear taper.
$1.50
Potentiometer - Bourns, Linear, Knurled, Conductive Polymer
Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.80
Save 2%
Originally: $8.95
Potentiometer - Bourns, Linear, Knurled Shaft
Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - Alpha, Audio, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. Audio taper.
$1.60
Potentiometer - AxLabs, Audio, Knurled Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
Potentiometer - 500kΩ, Linear, Knurled Long, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • 75" bushing length
  • 38"-.52" shaft length.
$11.95
Potentiometer - Bourns, Linear, Knurled Shaft, Mini
Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 200V
Starting at $2.80
Potentiometer - Bourns, Linear, Knurled Shaft, square
Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$9.95