Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation.1/4W, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
Potentiometer - CTS, Audio, Solid Shaft
  • Body Diameter: 24 mm
  • Power Rating 1/3 watt
  • Bushing Diameter: 3/8" (Threading: 3/8-32)
  • Bushing Length: ⅜"
  • Shaft Diameter: ¼"
  • Shaft Length: 3/8"
  • Shaft Material: Aluminum - Solid Shaft
$4.95
Potentiometer - Alpha, Audio, PC Mount
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
Potentiometer - CTS, Audio, 1 MΩ, SPST, Push-Pull, Solder Lug
Audio taper, SPST push-pull, solder lugs, 3/8" bushing, 24 mm
$10.29
Potentiometer - Alpha, Audio, Dual
24 mm carbon composition. 300° rotation. ¼" watt, 250VDC rating. ¼" diameter shaft.
$2.85
Potentiometer - Audio, Solid Shaft, Snap-In, 16mm
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40
Potentiometer - CTS, Audio, Splined Nylon Shaft
24mm, ½" watt, ⅜" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
Potentiometer - Audio, 16mm, Marshall Style
Audio, 16mm, 7mm bushing, knurled split shaft
$1.50
Potentiometer - Peavey, Audio, Spider
Peavey Audio Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
Starting at $4.95
Potentiometer - Marshall, Audio, 11mm, PC Mount, Square
Audio taper square body PC mount potentiometer by Marshall. Body width = 11mm
See R-VKG-XL for the Linear taper equivalent
$4.95
Partially Out of Stock
Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.90
Potentiometer - Precision Electronics, Audio, Slotted Shaft
Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
Starting at $25.35
Potentiometer - Fender®, Audio, for Blues Junior
Genuine Fender® replacement potentiometers with audio tapers for Blues Junior models.
  • 250 kΩ - Treble tone control
  • 1 MΩ - Volume

For linear taper pots for the BLues Junior, please see R-VBJ-XL.
Starting at $3.50
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$5.45
Potentiometer - Bourns, Audio, Knurled Shaft, Push-Pull, Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
Starting at $7.95
Potentiometer - Alpha, Audio, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. Audio taper.
$1.60
Potentiometer - Alpha, 1MΩ, Audio, Switch
Alpha, 1 meg, switched potentiometer. (SPST) 24mm body, 13/8" long x ¼" diameter solid shaft.
$3.55
Potentiometer - Alpha, Audio, SPST Switch
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
$2.95
Potentiometer - Alpha, 1MΩ, Audio, 7mm Bushing, DPDT Switch
Push-pull pot. 7mm bushing. 1 meg, ¼" solid metal shaft. Used in many Fender® applications.
$3.30
Potentiometer - Fender®, 1M, Solid Shaft
1M ohm, Solid Shaft. Original Fender. Used for Volume and Tone control in many Fender guitars as well as amplifiers.
$5.85
Potentiometer - Peavey, Audio, Mini, Bracket, 1 MΩ
Audio snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50
Potentiometer - Alpha, Audio, Solid Shaft, Long PC, 16mm
Audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.55
Potentiometer - Alpha, Audio, Solid Shaft, Right Angle, 16mm, Dual, 1MΩ
1MΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.90