Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - 10% Tolerance, Audio, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.
$2.95
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - 100 Ohm, Original Fender, Control
Original Fender® chassis-mount hum balance potentiometer, 100 ohm.
  • 100-ohm potentiometer used for hum balance control
  • 1/4" threaded brass bushing for mounting to amplifier chassis
  • Adjustable level control (flat-head screwdriver only)
  • Mounting nut and washer included
  • Adjustable from both the front and back face of pot
  • Used for '65 Twin Reverb®, Machete™ and Vibrasonic amplifiers (1992-present) plus others
$5.85
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.85
Potentiometer - 500kΩ, Linear, Knurled Long, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • 75" bushing length
  • 38"-.52" shaft length.
$11.95
Potentiometer - 500kΩ, Linear, Knurled Shaft, DPDT, Push-Push
Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.
$10.95
Potentiometer - Alpha, 1MΩ, Audio, 7mm Bushing, DPDT Switch
Push-pull pot. 7mm bushing. 1 meg, ¼" solid metal shaft. Used in many Fender® applications.
$3.30
Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.55
Potentiometer - Alpha, 1MΩ, Audio, Switch
Alpha, 1 meg, switched potentiometer. (SPST) 24mm body, 13/8" long x ¼" diameter solid shaft.
$3.55
Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - Alpha, Audio, Dual
24 mm carbon composition. 300° rotation. ¼" watt, 250VDC rating. ¼" diameter shaft.
$2.85
Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.90
Potentiometer - Alpha, Audio, Knurled Shaft, DPDT, 7mm Bushing
Push pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.
$3.30
Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm
Audio taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$0.99
Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.90
Potentiometer - Alpha, Audio, PC Mount
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation.1/4W, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
Potentiometer - Alpha, Audio, Solid Shaft, 16mm
16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Audio (Log)
Starting at $0.99
Potentiometer - Alpha, Audio, Solid Shaft, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Audio (Log)
$1.30
Potentiometer - Alpha, Audio, Solid Shaft, DPDT, 7mm Bushing
Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.
$3.30
Potentiometer - Alpha, Audio, Solid Shaft, Long PC, 16mm
Audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Alpha, Audio, Solid Shaft, Right Angle, 16mm
Alpha Mini Pots with solid shaft and long PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.25
Potentiometer - Alpha, Audio, Solid Shaft, Right Angle, 16mm, Dual, 1MΩ
1MΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.90
Potentiometer - Alpha, Audio, SPST Rotary Switch, 500kΩ
500kΩ 24mm audio taper pot from Alpha with an SPST rotary switch commonly used for ON/OFF settings on volume controls. This pot has a 6.25mm (0.25”) solid shaft and solder lug terminals.
$3.50