Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-VX-S1 Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT
The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.
$24.95
R-VB-CPSP Potentiometer - Bourns, Audio, Knurled Shaft, ⅜" Bushing
Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.377" L x 0.625" D
  • 300° rotation
  • Power Rating: ¼ watt
  • Tolerance: 10 %
  • ¼" Fine Knurled Split Shaft
  • ⅜" Bushing Length
  • J Hooks
  • Specifically designed for vintage guitars
  • Very Low Noise
Starting at $17.49
R-VDSP Potentiometer - Dunlop, Super Pot, Split Shaft
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • Audio taper
  • 24-knurl split shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$13.95
R-VDSP250S Potentiometer - Dunlop, Super Pot, Solid Shaft, 250kΩ
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • 250K Audio taper
  • Solid shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$13.95
R-VB-A-P Potentiometer - Bourns, Audio, Knurled Shaft, 24mm
Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$12.95
R-VTBX Potentiometer - Fender®, 250kΩ, Tone Control, for Tele / Strat
250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65
R-VB-A-XL Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
$8.80
R-VALXA-SP14 Potentiometer - AxLabs, Audio, Knurled Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-M Potentiometer - AxLabs, Audio, Solid Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-M14 Potentiometer - AxLabs, Audio, Solid Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-SP Potentiometer - AxLabs, Linear, Knurled Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALX-SP14 Potentiometer - AxLabs, Linear, Knurled Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-M Potentiometer - AxLabs, Linear, Solid Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-M14 Potentiometer - AxLabs, Linear, Solid Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-SP Potentiometer - AxLabs, Audio, Knurled Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VB-PPSP Potentiometer - Bourns, Audio, Knurled Shaft, Push-Pull, Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
Starting at $7.95
R-VB2 Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95
R-VXK-SP Potentiometer - Fender®, 250kΩ, Audio, Knurled Shaft
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
$6.95
R-V250K-SS Potentiometer - Fender®, 250kΩ, Solid Shaft
250K ohm, solid shaft. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender® packaging.
$6.95
R-VXA-SE Potentiometer - Audio, Knurled Shaft, Sealed, 24mm
Audio taper, knurled split shaft, sealed body 24mm potentiometer
$5.78
Save 15%
Originally: $6.80
R-VC-KA-SP Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$5.45
R-VCXA-SP-L Potentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing
CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Tolerance: 20%
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$5.45
R-VC-KL-SP Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$5.45
R-VCXL-SP-L Potentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing
CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$5.45