Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Alpha, Audio, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. Audio taper.
$1.50
Potentiometer - Alpha, 300kΩ, Linear, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. 300K linear taper.
$1.50
Potentiometer - Bourns, Audio, Solid Shaft, Mini
Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features:
  • Carbon element
  • 6mm Solid Shaft
  • 3/8" Bushing Width
  • 3/8" Bushing Length
  • Tolerance: ±20 %
  • Power Rating: 0.1 watt
  • Maximum Operating Voltage: 150 V
  • Bourns Series Number: PDB181-GT
$2.35
Potentiometer - Bourns, Audio, Solid Shaft, 24mm
Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
Starting at $2.40
Potentiometer - Bourns, Linear, Knurled Shaft
Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - Bourns, Dual MN Taper, Knurled Shaft
Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.50
Potentiometer - Bourns, Dual MN Taper, Solid Shaft, 500kΩ
Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼ watt, 300° rotation. 6mm shaft diameter. Solder lugs. 3/8" bushing.
$2.50
Potentiometer - Bourns, Audio, Knurled Shaft
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - Bourns, Linear, Solid Shaft
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Starting at $2.60
Potentiometer - Bourns, Audio, Knurled Shaft, Mini
Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Series Number: PDB181-GTR
$2.80
Potentiometer - Bourns, Linear, Knurled Shaft, Mini
Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 200V
Starting at $2.80
Potentiometer - 10% Tolerance, Audio, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.
$2.95
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - Alpha, Audio, Knurled Shaft, DPDT, 7mm Bushing
Push pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.
$3.25
Potentiometer - Alpha, Audio, Solid Shaft, DPDT, 7mm Bushing
Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.
$3.25
Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.25
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$3.85
Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
Starting at $4.25
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$4.50
Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
$4.50
Potentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing
CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - Fender®, 250kΩ, Pan, MN Taper, Solid Shaft
Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$4.95
Potentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing
CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - Fender, 50kΩ, Audio, Split Shaft, ¼" Bushing
Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25