Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
$4.50
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$4.50
Potentiometer - 10% Tolerance, Audio, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.
$2.95
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - Fender®, 250kΩ, Tone Control, for Tele / Strat
250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65
Potentiometer - Bourns, Audio, Knurled Shaft, 24mm
Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$10.95
Potentiometer - Bourns, Audio, Knurled Shaft, ⅜" Bushing
Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.377" L x 0.625" D
  • 300° rotation
  • Power Rating: ¼ watt
  • Tolerance: 10 %
  • ¼" Fine Knurled Split Shaft
  • ⅜" Bushing Length
  • J Hooks
  • Specifically designed for vintage guitars
  • Very Low Noise
Starting at $16.00
Potentiometer - Bourns, Audio, Solid Shaft, 24mm
Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
Starting at $2.40
Potentiometer - Bourns, Audio, Knurled Shaft
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing
CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95
Potentiometer - Fender®, 250kΩ, Audio, Knurled Shaft
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
$6.95
Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.25
Potentiometer - Bourns, Audio, Knurled Shaft, Mini
Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Series Number: PDB181-GTR
$2.80
Potentiometer - 500kΩ, Linear, Knurled Shaft, DPDT, Push-Push
Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.
$9.80
Potentiometer - Audio, Knurled Shaft, Sealed, 24mm
Audio, knurled shaft, sealed, 24mm.
$6.80
Potentiometer - Bourns, Dual MN Taper, Knurled Shaft
Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.50
Potentiometer - Dunlop, Super Pot, Split Shaft
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • Audio taper
  • 24-knurl split shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$13.95
Potentiometer - Fender, 50kΩ, Audio, Split Shaft, ¼" Bushing
Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25
Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.
Includes 1 nut and 1 lock washer.
$44.95
Potentiometer - Fender®, 250kΩ, Pan, MN Taper, Solid Shaft
Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$4.95
On Backorder
Potentiometer - Alpha, 300kΩ, Linear, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. 300K linear taper.
$1.50
Potentiometer - Alpha, 1MΩ, Audio, 7mm Bushing, DPDT Switch
Push-pull pot. 7mm bushing. 1 meg, ¼" solid metal shaft. Used in many Fender® applications.
$3.25
Potentiometer - Bourns, Linear, Solid Shaft
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Starting at $2.60