Potentiometers

CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: ⅜"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Aluminum - Solid Shaft
• Includes (1) Nut and (1) Lock Washer

Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push

• DPDT Push-Push switch
• ¼" split knurled shaft
• Linear taper
• 3/8-32 threads
• 16mm body diameter (widest point on switch body 17.8mm)
• .40" bushing length
• 38"-.52" shaft length.

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.

• 24mm diameter, single-turn potentiometers
• Carbon film element
• Metal shaft and bushing
• Panel mount
• Ear-lug solder terminals
• 6mm diameter slotted-end solid shaft
• 10mm bushing length
• 10mm shaft length (extended past bushing)
• Linear Taper

Genuine Fender® replacement potentiometers with linear tapers for Blues Junior models.

• 25 kΩ - Middle tone control
• 50 kΩ - Reverb / Master Volume
• 250 kΩ - Bass tone control

For audio taper pots for the BLues Junior, please see R-VBJ-XA.

Bourns 3352 - ⅜” Round Trimpot. This 1KΩ trimmer features a vertical PCB mount.
Features

• Single-Turn / Cermet / Industrial / Open Frame
• Stable cermet element offers infinite resolution
• Very low profile
• 3352K pin style
• Thumb and screwdriver adjustment
  

Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, linear.

Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
• Lead Distance from shaft center: 14.3 mm (0.563”)
• Lead Thickness: 0.5 mm (0.020”)
• Shaft Diameter: 6.35 mm (0.25”)

50 kΩ linear slide potentiometer by Peavey. Travel length is 45 mm

Linear taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

50K Linear, wire wound, XL shaft. 30 detents evenly-spaced throughout its rotation. Mounting hardware not included.

CTS 10K linear bias potentiometer. This panel mount trimpot is used in many Fender® amplifiers.

Please note: This potentiometer does not include the washer and nut. If you would like to purchase the washer and nut, see our part number R-VNUT-38

Dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Linear

Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included

22kΩ linear taper. Used as bias / trim potentiometer for JMP.
For a same-brand generic replacement, see R-V25KV-BP.

Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.

Linear. 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2

Alpha Mini Pots with solid shaft and long PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.

• DPDT Push-Push switch
• ¼" split knurled shaft
• Linear taper
• 3/8-32 threads
• 16mm body diameter (widest point on switch body 17.8mm)
• 75" bushing length
• 38"-.52" shaft length.

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper. ¼" diameter shaft.

24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.

24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.

Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and most notably in Marshall amplifiers. Features:

• Carbon resistive element
• Dust proof enclosure
• Polyester substrate