Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Potentiometer - Fender®, 250kΩ, Audio, Knurled Shaft
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
$6.95
On Backorder
Potentiometer - Fender®, 250kΩ, Knurled Shaft, No Load
250K ohm. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors.
$7.45
Potentiometer - Fender®, 250kΩ, Solid Shaft
250K ohm, solid shaft. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender® packaging.
$6.95
Potentiometer - Fender, 250K, Solid Shaft, No Load
250K ohm, solid shaft, no load. Some Fender guitars have a unique tone circuit that features a "Delta Tone" Control. The "Delta Tone" system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which has a detent at the 5 position and gradually reduces the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup.
$7.45
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.70
Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.70
Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.70
Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
Potentiometer - Alpha, Linear, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55
Potentiometer - Bourns, Audio, Solid Shaft, 24mm
Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
$2.65
Potentiometer - Bourns, Audio, Knurled Shaft, 24mm
Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$10.95
Potentiometer - Bourns, Linear, Solid Shaft
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.65
Potentiometer - Bourns, Audio, Knurled Shaft
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$4.50
Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
Starting at $4.25
Potentiometer - CTS, Audio, Solid Shaft
  • Body Diameter: 24 mm
  • Power Rating 1/3 watt
  • Bushing Diameter: 3/8" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: 3/8"
  • Shaft Material: Aluminum - Solid Shaft
$3.60
Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$3.60
Potentiometer - CTS, Audio, Splined Nylon Shaft
24mm, ½" watt, ⅜" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.25
Potentiometer - CTS, Audio, Knurled Shaft, .375" Bushing, DPDT
Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
$6.95
Potentiometer - CTS, Audio, Knurled Shaft, ¾" Bushing
CTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
$4.50
Potentiometer - CTS, J Taper, Solid Shaft, Panel Mount
CTS J Taper audio potentiometer.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/8"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass - Solid Shaft
$4.25
Potentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing
CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95