Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-V38-2XXA Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.90
R-V38-X-RA Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
R-V38-XA Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
R-V38-XL Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
R-V500K-SS Potentiometer - Fender®, 500kΩ, Audio, Solid Shaft
500K ohm (audio taper), solid shaft. Made in Taiwan.
$6.95
R-VA24S-500KA Potentiometer - Alpha, Audio, SPST Rotary Switch, 500kΩ
500kΩ 24mm audio taper pot from Alpha with an SPST rotary switch commonly used for ON/OFF settings on volume controls. This pot has a 6.25mm (0.25”) solid shaft and solder lug terminals.
$3.50
R-VA2XXA Potentiometer - Alpha, Audio, Dual
24 mm carbon composition. 300° rotation. ¼" watt, 250VDC rating. ¼" diameter shaft.
$2.85
R-VA2XXL Potentiometer - Alpha, Linear, Dual
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper. ¼" diameter shaft.
$2.95
R-VALX-SP14 Potentiometer - AxLabs, Linear, Knurled Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-M Potentiometer - AxLabs, Audio, Solid Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-M14 Potentiometer - AxLabs, Audio, Solid Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-SP Potentiometer - AxLabs, Audio, Knurled Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXA-SP14 Potentiometer - AxLabs, Audio, Knurled Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-M Potentiometer - AxLabs, Linear, Solid Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-M14 Potentiometer - AxLabs, Linear, Solid Shaft, Dish Back, ¼” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VALXL-SP Potentiometer - AxLabs, Linear, Knurled Shaft, Dish Back, ⅜” Bushing
High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.
$8.49
R-VAMA-SS Potentiometer - Alpha, Audio, Solid Shaft, 16mm
16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Audio (Log)
Starting at $0.99
R-VAMA-SS-PC Potentiometer - Alpha, Audio, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 3.8 mm (0.150”)
  • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.25
R-VAMA-SS-PCL2 Potentiometer - Alpha, Audio, Solid Shaft, Long PC, 16mm
Audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
R-VAMC-SS Potentiometer - Alpha, Reverse Audio, Solid Shaft, 16mm
Reverse audio taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Reverse Audio (Anti-Log)
$0.99
R-VAML-SS Potentiometer - Alpha, Linear, Solid Shaft, 16mm
16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Linear
Starting at $0.99
R-VAML-SS-PC Potentiometer - Alpha, Linear, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 3.8 mm (0.150”)
  • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.15
R-VAML-SS-PCL Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm
Alpha Mini Pots with solid shaft and long PC mount terminals.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
Starting at $0.85
R-VAML-SS-PCL2 Potentiometer - Alpha, Linear, Solid Shaft, Long PC, 16mm
Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85