Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
Trimmer - Bourns, 3352K, Single-Turn, Side Adjust, 1KΩ
Bourns 3352 - ⅜” Round Trimpot. This 1KΩ trimmer features a vertical PCB mount.
Features
  • Single-Turn / Cermet / Industrial / Open Frame
  • Stable cermet element offers infinite resolution
  • Very low profile
  • 3352K pin style
  • Thumb and screwdriver adjustment
$1.95
Potentiometer - 100 Ohm, Original Fender, Control
Original Fender® chassis-mount hum balance potentiometer, 100 ohm.
  • 100-ohm potentiometer used for hum balance control
  • 1/4" threaded brass bushing for mounting to amplifier chassis
  • Adjustable level control (flat-head screwdriver only)
  • Mounting nut and washer included
  • Adjustable from both the front and back face of pot
  • Used for '65 Twin Reverb®, Machete™ and Vibrasonic amplifiers (1992-present) plus others
$5.85
Potentiometer - CTS, 10K, Linear, Bias Trimmer, Screw
CTS 10K linear bias potentiometer. This panel mount trimpot is used in many Fender® amplifiers.

Please note: This potentiometer does not include the washer and nut. If you would like to purchase the washer and nut, see our part number R-VNUT-38
$4.05
Potentiometer - Marshall, 10kΩ, Linear, Dual, 16mm
10K dual linear, 16mm, 7mm bushing.
$3.95
Potentiometer - Marshall, 22kΩ, Linear, Bias, for JMP
22kΩ linear taper. Used as bias / trim potentiometer for JMP.
For a same-brand generic replacement, see R-V25KV-BP.
$3.95
Potentiometer - 10% Tolerance, Audio, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.
$2.95
Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.90
Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.85
Potentiometer - Alpha, Audio, SPST Rotary Switch, 500kΩ
500kΩ 24mm audio taper pot from Alpha with an SPST rotary switch commonly used for ON/OFF settings on volume controls. This pot has a 6.25mm (0.25”) solid shaft and solder lug terminals.
$3.50
Potentiometer - Alpha, Audio, Dual
24 mm carbon composition. 300° rotation. ¼" watt, 250VDC rating. ¼" diameter shaft.
$2.85
Potentiometer - Alpha, Linear, Dual
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper. ¼" diameter shaft.
$2.95
Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.90
Potentiometer - Alpha, Audio, Solid Shaft, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: Audio (Log)
$1.30
Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.90
Potentiometer - Alpha, Linear, Knurled Shaft, Right Angle, 16mm, Dual, 10kΩ
10kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.90
Potentiometer - Alpha, Audio, Solid Shaft, Right Angle, 16mm, Dual, 1MΩ
1MΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.90
Potentiometer - Alpha, W-Taper, Solid Shaft, 16mm, 20kΩ
20kΩ W taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Bushing Length: 6.5mm (0.256")
  • Shaft Diameter: 6.35mm ( 0.250")
  • Taper: W
$0.99
Potentiometer - Alpha, W-Taper, Solid Shaft, Right Angle, 16mm, 20kΩ
20kΩ W taper Alpha 16mm pots with a solid shaft and right angle PC mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Alpha, Reverse Audio, Solid Shaft, Long PC, 16mm, 5kΩ
5kΩ reverse audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
  • Lead Distance from shaft center: 14.3 mm (0.563”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm
Audio taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$0.99