Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals

Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals

Pictured: Basic Kit
Pictured: Basic Kit
Pictured: Basic Kit
Pictured: Basic Kit
Pictured: Deluxe Kit
Pictured: Deluxe Kit
Pictured: Deluxe Kit
Pictured: Deluxe Kit
Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals image 5
Click to zoom in
Pictured: Basic KitPictured: Basic KitPictured: Deluxe KitPictured: Deluxe KitPower Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals image 5
Customer Images:
No Images yet! Submit a product image below!
Starting at: $30.95
In Stock

Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects. Power-All® kits include a variety of useful cables for powering multiple pedals to the ECO-Dapter® 9V supply.

In partnership with CarbonFund.org, the ECO-Dapter®’s carbon footprint is neutralized through the purchase of carbon offsets. CarbonFund.org’s certified carbon reductions are third party audited to assure the highest standards and are retired rather than being re-used.

The ECO-Dapter® also meets the stringent Level VI energy efficiency standards set out by the U.S. Department of Energy. This means that the ECO-Dapter® consumes less power, conserving natural resources while also eliminating the waste and environmental hazards associated with disposable batteries.

In addition to environmentally friendly operation, the ECO-Dapter® provides ultra quiet, reliable, high-current power to your effects so they can operate at their peak performance levels.

Connect the ECO-Dapter® directly to your favorite pedals using the included Cable-5/R daisy chain & jumper cables. Purchase optional Power-All® daisy chain & jumper cables to power your entire pedalboard from a single ECO-Dapter® power supply!

Features:

  • 9 VDC, 2000 mA regulated power supply
  • Meets DOE Level VI energy efficiency standard
  • Carries CarbonFund.org Carbonfree® certification
  • Ultra-low noise floor for silent operation
  • Environmentally-friendly, Recycled/Recyclable packaging
  • Lifetime warranty – never buy another power supply!
  • Powers all your 9 VDC pedals from a single supply
  • Space-saving profile takes up only one outlet space
  • Special low-noise circuitry reduces ripple current and hum
  • Ferrite-core filter module on power output cable reduces noise and hum
  • Powers 9 VDC effects from any electrical outlet in the world (100-240VAC)
  • 10-foot, 24-gauge power cable eliminates need for an extension cord

All Power-All Cables utilize our own Lo-Pro™ Plug design which offers the smallest plug dimensions possible in order to save space on your pedalboard and to make connection to your pedals quick, easy and efficient.

Kits include:

Basic Kit Deluxe Kit
1 × Power-All Power Supply (M-PAS-S) 1 × Power-All Power Supply (M-PAS-S)
1 × 11/R Cable (M-PAS-CABLE-2)
Eleven-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo!
1 × 5/R Cable (M-PAS-CABLE-1)
Five-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo!
1 × Blue Cable (M-PAS-CABLE-4)
3.5 mm Phone Plug Jumper Cable for EH and other vintage pedals
1 × Blue Cable (M-PAS-CABLE-4)
3.5 mm Phone Plug Jumper Cable for EH and other vintage pedals
1 × Green Cable (M-PAS-CABLE-5)
Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack
1 × Green Cable (M-PAS-CABLE-5)
Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack
1 × Grey Cable (M-PAS-CABLE-6)
Battery Clip Jumper Cables for pedals with no AC input
1 × Grey Cable (M-PAS-CABLE-6)
Battery Clip Jumper Cables for pedals with no AC input
1 × Red/R Cable (M-PAS-CABLE-7)
Right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
1 × Red/R Cable (M-PAS-CABLE-7)
Right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
1 × Black Extension Cable (M-PAS-CABLE-3)
Right-angle Extension Cable provides an additional 10.5” of length for longer power runs, oversized pedals or hard-to-reach power jacks.
3 × Cable Cap (M-PAS-CABLECAP)
Insulator sheaths to cover power leads when not in use
5 × Cable Cap (M-PAS-CABLECAP)
Insulator sheaths to cover power leads when not in use

Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.

SKU:
M-PAS-X
Item ID:
039900
Brand:
Power All
RoHS Compliant
Part Numbers
Kit TypeOur Part NumberUPC/EANGodlyke Part Number
Basic KitM-PAS-B859474002023 PA-9B
Deluxe KitM-PAS-D859474002016 PA-9D
Product Measurements by Type
Depth2.66 in.
Item Length3.06 in.
Item Width1.3 in.
Packaging Information
Packaging DimensionsBasic Kit versionM-PAS-B5.75 in. × 3.35 in. × 2 in.
Deluxe Kit versionM-PAS-D6.4 in. × 4.8 in. × 2.4 in.
Weight (Packaging)Basic Kit versionM-PAS-B0.666 lbs.
Deluxe Kit versionM-PAS-D0.81 lbs.
Product Measurements by Item
M-PAS-B - Basic Kit versionDepth2.66 in.
Item Length3.06 in.
Item Width1.3 in.
M-PAS-D - Deluxe Kit versionDepth2.66 in.
Item Length3.06 in.
Item Width1.3 in.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on August 31st, 2017.
Matt H.
August 31st, 2017
Staff Member
Yes, according to the manufacture this will work with all Line 6 modeler pedals but you must use the green cable.
Anonymous
April 28th, 2018
will this power mxr pedals?
Asked by Anonymous on March 14th, 2020.
BradWbr
March 16th, 2020
Staff Member
This set includes a negative tip/positive barrel male jack rated at 2,000 milliamps. You will need to check your application for compatibility.
Asked by Anonymous on March 14th, 2020.
BradWbr
March 16th, 2020
Staff Member
Although the power supply is digital, this can be used with both digital and analog pedals.

Product Reviews

No product reviews yet! Be the first!