Radio & Antique Equipment Parts

Diode - 1N34A Germanium, low leakage
The 1N34A Germanium diode is an old standby in electronics. Widely used for detecting the rectifying efficiency or for switching on a radio, TV or stereo etc.
$1.75
Wire - 20 AWG Stranded Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL
Starting at $4.00
Potentiometer - Alpha, Audio, SPST Switch
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
$2.65
Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
Earphone - Crystal, 3.5mm, High Impedance
High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.
$3.95
Knob Springs - for half moon / D shafts
Package of 6
Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.
$0.75
Save 24%
Originally: $0.99
Washer - Rubber, Chassis Mount, ⅞" Diameter
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.
$0.75
Wire - 18 Gauge Braided Power Cord, Parallel Gold, Per Foot
Sold by the foot
18 gauge braided power cord in gold - approximates the look of vintage power cords. 105°C temperature rating, 600V.
$1.15
Washer - Rubber, Chassis Mount, 1-⅛" x ¼" Thick
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Overall dimensions 1 1/8" dia. x 1/4" thick.
$1.75
Grommet - Motor Mounting, package of 9
Package of 9
Rubber grommets for mounting phonograph motors. 1/2 dia. 5/16" high and ¼" inner dia.
$6.75
Washer - ⅞" x ⅛" Thick, Rubber, Chassis Mount,
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.
$0.65
Schematic Service - Radio, Hi-Fi Amps, Tuners, Receivers, etc.
To order a schematic, enter the make and model of your schematic and click the Add to Cart button. Alternatively, you can browse our library of schematics online to find the schematic you're looking for. We have a vast library of schematics and if we have the one you are looking for we'll send it to you. If we do not have what you need, we'll contact you to let you know.
$8.00
Belt - Leslie, Upper Drive, 25.5", for 122/147, Polyurethane
Replacement upper drive belt for Leslie models 122 and 147. This belt is made of a high quality clear polyurethane that is both chemical and abrasion resistant ensuring a long life of use. This round belt had a 25.5 in. diameter with a sanded seam to ensure a smooth drive.
$13.95
Motor Rebuild Kit - Lower Slow, for Leslie 122/147
Lower slow motor rebuild kit for Leslie models 122/147. Includes installation instructions.
$4.95
O-Ring - Leslie, Rim Drive for Large Pulley
Replacement rubber O ring for the Leslie 122 and 147 cabinets.
$6.95
Cable - Power All, Grey Battery Snap Jumper
Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
$3.00
Vibrator - 4 Pin, for automobile radio
New manufacture solid-state replacement 4 pin vibrators. These replace our old line of solid state vibrators. 1-1/2 dia. x 2-¾" high aluminum can. Replace your buffer capacitor when you replace your vibrator!
Starting at $34.95
Coil - 3-Lug Oscillator, 142UHY
Fixed 3 lug oscillator coil with a 142 μH inductance. This coil has a bracket to easily mount it to panels, chassis or elsewhere.
$1.95
Alignment Kit - GC Electronics, for color TVs
Package of 6
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$7.95
Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
$14.95
Motor Rebuild Kit - Upper Slow, for Leslie 122/147
Upper slow motor rebuild kit fits Leslie models 122/147. Includes installation instructions.
$4.95
Fahnestock Clip - electrical terminal for wire connections
Spring clip ¾" long for up to 15 ga. wire. Hole fits U.S. Screw size # 6.
Starting at $5.79
Plug - for Leslie, 6 Pin Male, wavy washer
6 pin male plug with wavy washer, for Leslies.
$14.35
Cleaner - Rubber Revitalizer, 1 oz, for restoration / protection
Cleans and revitalizes rubber, prolonging life and restoring function.
  • Prolongs life of rubber parts
  • Deglazes hardened rubber hoses, drive wheels and belts.
  • Revitalizes rubber by removing buildup
  • Restores the "gripping" surface
  • Cleans and makes surfaces like new
$7.95