Resistors

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types.

Metal Oxide resistors are for applications where stability under high temperature conditions is required.

• 2 watt
• ± 5% tolerance
• -55° C to 240° C operating range (derated over 70° C)
• 350 V working, 600 V overload
• Excellent flame retardant coating
• Stable performance in diverse conditions
• High purity ceramic core
• EIA color coded
• .57" long x .20" diameter

Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12 15 20 22 27 30 39 47 51 68 82 100 110 120 150 180 200 220 240 270 300 330 390 470 510 560 680 750 820 1k 1.1k 1.2k 1.5k 1.6k 1.8k 2k 2.2k

Metal Oxide resistors are for applications where stability under high temperature conditions is required.

• 1 watt
• ± 5% tolerance
• -55° C to 240° C operating range (derated over 70° C)
• 350 V working, 600 V overload
• Excellent flame retardant coating
• Stable performance in diverse conditions
• High purity ceramic core
• EIA color coded
• .47" long x .20" diameter

Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop.

• 1 Watt 500V working, 1000V overload, 0.5" long by 0.14" dia.
• High stability, low noise, moisture stable.
• EIA color coded.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop.

• ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.
• High stability, low noise, moisture stable.
• EIA color coded.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Package of 5. These resistors are perfect for pedal builders! 1/4 watt ± 5% tolerance EIA color coded .24" long x .08" diameter Resistance Values (5 each) 100 470 1K 2.7K 4.7K 8.2K 10K 22K 33K 47K 100K 150K 220K 470K 560K 1M

High quality 8W power resistors from Ohmite’s Brown Devil® series. These resistors are used in original Fender® tweed amps. Ohmite’s Brown Devil® is a small, exceptionally durable power resistor. It features all-welded con-struction and rugged, flame resistant conformal lead free vitreous enamel coating to ensure successful performance under high temperatures.The wirewound 200 Series has a hollow-core con-struction, which accommodates rigid mounting with brackets or thru bolts.Mounting brackets not included with resistors. Features

• Rugged lead free vitreous enamel coating
• All-welded construction
• Self supporting terminal mounting option
• 8W power rating
• Flame-resistant lead free vitreous enamel coating

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.

Metal Oxide resistors are for applications where stability under high temperature conditions is required. Sold in multiples of 5. 2 watt. ±5% tolerance

Metal Oxide resistors are for applications where stability under high temperature conditions is required. Sold in multiples of 5. 1 watt.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ±5% tolerance. 1 watt

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Sold in multiples of 5.

• 1/2 watt
• ± 1% tolerance
• -55° C to 155° C operating range
• 350 V working, 700 V overload
• Epoxy coated
• Nickel chromium ceramic substrate
• Alloy coated leads
• Welded end caps
• EIA color coded
• .40" long x .14" diameter

Radial-lead PTC thermistor often used to protect sensitive components from overcurrent damage. This thermistor is 50Ω±20% at 25˚C.

• One watt rating
• ± 20% tolerance
• New production
• Carbon composition
• Sold individually

Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 10 watt.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.

High quality reduced mass cemented wirewound 5W 1KΩ resistors. These durable resistors are the perfect choice for screen grid resistors due to their reduced size and weight compared to ceramic wirewound resistors. Sold individually.

• 5 watt
• ±5% tolerance
• 18mm long by 7.5mm dia.
• 1.90g

High quality, reduced mass cemented wirewound 3W 470Ω resistors. These durable resistors are the perfect choice for screen grid resistors due to their reduced size and weight compared to ceramic wirewound resistors. Sold individually.

• 3 watt
• ±5% tolerance
• 13mm long by 4.8mm dia.
• 0.75g

High quality metal film resistors from Vishay / BC Components. PR03 resistors are rated for 3W but have a compact 5.2x19.5mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.

Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 5 watt.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Package of 5. These resistors are perfect for pedal builders!

• 1/4 watt
• ± 5% tolerance
• EIA color coded
• .24" long x .08" diameter
• Package of 5