You are here

Reverb Tanks

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
P-RMOD-8BB3C1BReverb Tank - MOD, 8BB3C1B
  • Replacement Reverb Tank for 8BB3C1B
  • Solid, Sturdy Construction
  • Short (9-1/4”) 3 Spring Unit , Long Decay (2.75 to 4.0 seconds)
  • Input Impedance 190 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane




Compatible Amps Include: Fender Harvard Reverb II and Yale Reverb amps (short tank)


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$17.50
Click to read more about this product.
P-RMOD-9BC2C1BReverb Tank - MOD, 9BC2C1B
  • Replacement Reverb Tank for 9BC2C1B
  • Solid, Sturdy Construction
  • Long (16.75") 3 Spring Unit , Medium Decay (1.75 to 3.0 seconds)
  • Input Impedance 190 Ohms, Output Impedance 12000 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane


Compatible Amps Include: VOX AC30TBR (‘91-’93 Vintage top Boost Reverb) , Gibson Super Goldtone GA-30RV , Gibson Super Goldtone GA-60RV The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.


$19.95
Click to read more about this product.
P-RMOD-9EB3C1BReverb Tank - MOD, 9EB3C1B
  • Replacement Reverb Tank for 9EB3C1B
  • Solid, Sturdy Construction
  • Long (16 ¾") 3 Spring Unit , Long Decay (2.75 to 4.0 seconds)
  • Input Impedance 800 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.


$19.95
Click to read more about this product.
P-RMOD-8FB2C1BReverb Tank - Mod, Equivalent to 8FB2C1B, Black Finish
  • Replacement Reverb Tank for 8FB2C1B
  • Solid, Sturdy Construction
  • Short (9 ¼") 3 Spring Unit, Medium Decay (1.75-3.0 seconds)
  • Input Impedance 1925 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal,Open Side Down Mounting Plane


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
$17.95
Click to read more about this product.
P-RMOD-4AB1C1BReverb Tank - MOD®, 4AB1C1B

Long, 2 spring. 8 input ohms, 2,250 output ohms, short decay.


$18.95
Click to read more about this product.
P-RMOD-4AB3C1BReverb Tank - MOD®, 4AB3C1B


$18.95
Click to read more about this product.
P-RMOD-4AB3C1CReverb Tank - MOD®, 4AB3C1C
Replacement Reverb Tank for 4AB3C1C
  • Solid, Sturdy Construction
  • Long (16 ¾") 2 Spring Unit , Long Decay (2.75-4.0 seconds)
  • Input Impedance 8 Ohms, Output Impedance 2250 Ohms
  • Input Insulated/Output Grounded
  • Vertical, Connectors Up Mounting Plane
  • Replacement for Fender Part Number 0047604000
  • Used In Fender® stand alone reverb and original ’63 Reverb. Also used in Marshall™,and Ampeg™ amps.

The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$18.95
Click to read more about this product.
P-RMOD-4BB2A1BReverb Tank - MOD®, 4BB2A1B
  • Replacement Reverb Tank for 4BB2A1B
  • Solid, Sturdy Construction
  • Long (16 ¾") 2 Spring Unit , Medium Decay (1.5-2.75 seconds)
  • Input Impedance 150 Ohms, Output Impedance 2250 Ohms
  • Input Grounded/Output Grounded
  • Horizontal,Open Side Down Mounting Plane
  • Used In Music Man™ amps as well as the Mesa Boogie™ F-30 and F-50 models



The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$18.95
Click to read more about this product.
P-RMOD-4BB3C1BReverb Tank - MOD®, 4BB3C1B
  • Replacement Reverb Tank for 4BB3C1B
  • Solid, Sturdy Construction
  • Long (16 ¾") 2 Spring Unit , Long Decay (2.75 - 4.0 seconds)
  • Input Impedance 150 Ohms, Output Impedance 2250 Ohms
  • Input Insulated/Output Grounded
  • Horizontal,Open Side Down Mounting Plane

Compatible Amps Include: Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference.
$18.95
Click to read more about this product.
P-RMOD-4BB3C1DReverb Tank - MOD®, 4BB3C1D

Equivalent to 4BB3C1B, designed to sound like vintage tanks. Type 4, 150 ohm input, 2,250 ohm output, long decay, 2 spring.


$18.95
Click to read more about this product.

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Reverb Tanks