You are here

Reverb Tanks

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-RBTDR-3HReverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit

Features:
  • Reverb depth (decay adjustable via 2 external resistors or 1 dual potentiometer
  • Stereo outputs may be summed for mono operation
  • Simple interface: input, output, +5V, and ground
  • AC-coupled input and outputs require no external capacitors

Specifications:


PARAMETER
SYMBOL
MINIMUM
TYPICAL
MAXIMUM
UNIT


Supply Voltage
Vcc
4.5
5.0
5.5
V


Supply Current
Icc

60
100
mA


Input Voltage
Vin


1.5
Vpeak


Voltage Gain


-3

dB (>10kOhm load)


Residual Noise


-77

dBV


Input Impedance
Zin

10k

Ohm


Output Impedance
Zout

220

Ohm


Operating Temperature

-40
$15.95
Click to read more about this product.
P-RMOD-8FB2C1BReverb Tank - Mod, Equivalent to 8FB2C1B, Black Finish
  • Replacement Reverb Tank for 8FB2C1B
  • Solid, Sturdy Construction
  • Short (9 ¼") 3 Spring Unit, Medium Decay (1.75-3.0 seconds)
  • Input Impedance 1925 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal,Open Side Down Mounting Plane


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
$17.95
Click to read more about this product.
P-RMOD-8AC2B1BReverb Tank - MOD®, 8AC2B1B
  • Replacement Reverb Tank for 8AC2B1B
  • Used In Fender, Marshall, And Ampeg Amps
  • Solid, Sturdy Construction
  • Short (9 1/4") 3 Spring Unit, Medium Decay
  • Input Impedance 10 Ohms, Output Impedance 2,575 Ohms


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. Questions about reverb tanks?
$17.95
Click to read more about this product.
P-RMOD-8EB2C1AReverb Tank - MOD®, 8EB2C1A
  • Replacement Reverb Tank for 8EB2C1A
  • Solid, Sturdy Construction
  • Short (9-1/4") 3 Spring Unit , Medium Decay (1.75 to 3.0 seconds)
  • Input Impedance 800 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Up Mounting Plane




Compatible Amps Include: Yamaha® JX30, Peavey® 6505+ , plus others

The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$17.50
Click to read more about this product.
P-RMOD-9EB3C1BReverb Tank - MOD, 9EB3C1B
  • Replacement Reverb Tank for 9EB3C1B
  • Solid, Sturdy Construction
  • Long (16 ¾") 3 Spring Unit , Long Decay (2.75 to 4.0 seconds)
  • Input Impedance 800 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.


$19.95
Click to read more about this product.
P-RMOD-4FB3A1AReverb Tank - MOD®, 4FB3A1A
Replacement Reverb Tank for 4FB3A1A
  • Solid, Sturdy Construction
  • Long (16 ¾") 2 Spring Unit , Long Decay (2.75 – 4.0 seconds)
  • Input Impedance 1475 Ohms, Output Impedance 2250 Ohms
  • Input Grounded/Output Grounded
  • Horizontal, Open Side Up Mounting Plane

Compatible Amps Include: Select versions of the Ampeg™ Gemini and select Kustom™ amps from the 60’s and 70’s.
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$18.50
Click to read more about this product.
P-RMOD-9AB1C1BReverb Tank - MOD®, 9AB1C1B
  • Replacement Reverb Tank for 9AB1C1B
  • Solid, Sturdy Construction
  • Long (16 ¾") 3 Spring Unit , Short Decay (1.2 to 2.0 seconds)
  • Input Impedance 10 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane




Compatible Amps Include: Epiphone® So-Cal ,Select Diezel® models, plus others

The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$19.95
Click to read more about this product.
P-RMOD-8BB3C1BReverb Tank - MOD, 8BB3C1B
  • Replacement Reverb Tank for 8BB3C1B
  • Solid, Sturdy Construction
  • Short (9-1/4”) 3 Spring Unit , Long Decay (2.75 to 4.0 seconds)
  • Input Impedance 190 Ohms, Output Impedance 2575 Ohms
  • Input Insulated/Output Grounded
  • Horizontal, Open Side Down Mounting Plane




Compatible Amps Include: Fender Harvard Reverb II and Yale Reverb amps (short tank)


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks.
$17.50
Click to read more about this product.
P-RMOD-8EB1C1BReverb Tank - MOD®, 8EB1C1B
Replacement Reverb Tank for 8EB1C1B

Solid, Sturdy Construction. Short (9 1/4") 3 Spring Unit, Medium Decay

  • Input Impedance: 800 Ohms
  • Output Impedance: 2575 Ohms


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. Questions about reverb tanks? Please see Accutronics Products and Specifications in our tech corner.
$17.50
Click to read more about this product.
P-RMOD-8DB2C1EReverb Tank - MOD®, 8DB2C1E
Replacement Reverb Tank for 8DB2C1E

Solid, Sturdy Construction. Short (9 1/4") 3 Spring Unit, Medium Decay

  • Input Impedance: 310 Ohms
  • Output Impedance: 2575 Ohms


The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. Questions about reverb tanks? Please see Accutronics Products and Specifications in our tech corner.
$17.50
Click to read more about this product.
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Reverb Tanks