Reverb Tanks

Spring reverb tanks are used to create a unique reverberation effect in guitar amps and organs. The reverberation effect is created when an audio signal created by a transducer is sent through one or more springs, the movement of the springs is then converted back into an audio signal by another transducer at the other end, creating the unique sound. Not sure which tank you're looking for or what a 4AB3C1B is? Check out our spring reverb calculator to help you determine what these tank designations mean!
Grommet - Rubber, for Reverb Tank vibration
Package of 4
Mount these rubber grommets to the base of reverb tanks to help alleviate feedback and other vibration issues. The thick rubber ring helps with isolating the tank from the surface that it is mounted to or resting upon. These rubber grommets fit typical reverbs tanks. Mounting Hole Diameter = 3/8" Outer Diameter = 1/2". Package of 4.
$1.30
Cable - RCA, Shielded, Right Angle Plugs
Right angle RCA cables for Reverb Tanks and other electronic devices.
Starting at $4.89
Reverb Tank Liner - for 17" Bag, Handmade Black Tolex
Insert bag for greater isolation. Liner for 17" tanks to make a 2-ply bag.
Note: This product is a liner for a reverb bag. It is not meant to be used as a reverb bag by itself.
$6.95
Reverb Tank Bag - For Mod® Mini Tanks, Handmade Black Tolex
Handmade black tolex bags for Mod® Mini reverb tanks. These bags can help isolate tanks housed in cabinets from external vibrations allowing the springs to fully vibrate resulting in fuller and richer reverberations. The bags for Mod® Mini tanks fit all MN-8 (5.875") type reverb tanks. Features
  • Handmade from durable black tolex
  • Helps to isolate reverb tanks from external vibrations
  • Protects tank from wear and dust
  • Two end tabs for easy mounting
  • Fits all Mod® Mini reverb tanks
$7.95
Reverb Tank - Accutronics, AMC2BF, 2-Spring
Accutronics mini-size spring reverb tank. 2-spring, 150Ω input impedance, 1500Ω output impedance. 4.88" x 1.73" mounting centers. Available in medium or long decay.
$9.00
Reverb Tank - Accutronics, AMC2EF3, Long Decay, 2-Spring
Accutronics mini-size spring reverb tank. Long decay, 2-spring, 600Ω input impedance, 1500Ω output impedance. 4.88" x 1.73" mounting centers.
$9.00
Reverb Tank Bag - 9" Long, Handmade Black Tolex
Reverb tank bags give the reverb tank better isolation which results in fuller, richer reverb. Handmade of single-ply black Tolex reverb tank bags. Replacement for Fender and other amps. Bag dimensions: 4.5"W x 1.5"H x 9.5"L
$9.95
Reverb Tank Bag - Fender®, for 17" Reverb Tanks
Original Fender® reverb tank bag for 17" tanks. Bag dimensions: 7.25"W x 2.5"H x 22.5"L with a lip at 20" to place the tank in. Used in Prosonic™, Blues Deluxe™/DeVille™, Hot Rod Deluxe™/DeVille™, Showman® 50, '94 Twin®, Custom Vibrolux®, Custom Vibrasonic, Pro Tube series Twin®/Concert/Pro Reverb, '63 Vibroverb®, '65 Twin Reverb®, '65 Deluxe Reverb®, '65 Super Reverb®, Vibro-King®, Dual Professional, Super-Sonic™ series, '65 Twin Custom®, Princeton®, Steel King™, Jazz King™ and '65 Princeton amplifiers (1986-present)
$10.55
Reverb Tank Bag - 17 in. Long, Handmade of Camouflage Tolex
Reverb tank bags give the reverb tank better isolation which results in fuller, richer reverb as well as protection from feedback. Handmade of single-ply camouflage tolex. Replacement for Fender and other amps.
$10.75
Out of Stock
Reverb Tank Bag - 17" Long, Handmade Black Tolex
Reverb tank bags give the reverb tank better isolation which results is fuller, richer reverb.
$10.95
Reverb Module - Accutronics Belton, Digi-Log, horizontal mount
A great digital reverb sound that easily replaces a spring reverberation unit. Simple interface requires only input, output, +5V, and ground. Output requires no external capacitors.
Starting at $11.01
Save 15%
Originally: $12.95
Reverb Tank Bag - 17" Long, Handmade Tweed Tolex
Handmade vinyl tweed tolex replacement for Fender® and others. Fits 17" tanks.
$12.95
Reverb Cable Kit - Vintage style RCA, 3 ft and 5 ft
Package of 2
Fully Assembled version: Package includes two vintage style RCA cables: One 3 foot and one 5 foot.
DIY Kit: Assembly required. Kit comes with one 3 ft. and one 5 ft. length of insulated braided wire and 4 RCA plugs. Solder RCA plugs onto the ends of the wires by stripping 3/8" of the white insulation from wire. Insert wire into tip. Solder in place. Next, solder braided shielding to sleeve of the plug.
Starting at $13.95
Reverb Module - Accutronics Belton, Digi-Log, horizontal, mini
A great digital reverb sound that easily replaces a spring reverberation unit. Small package is half the size of the P-RBTDR-1H-X
$14.95
Reverb Module - Accutronics, Digi-Log, vertical mount, mini
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface requires only input, output, +5V, and ground.
$14.95
Reverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface: input, output, +5V, and ground
$15.95
Reverb Tank - Mod® MN-8BB2C1B, Medium Decay, 3-Spring, Mini
Compatible amps include any reverb that uses _BB_C1B type tanks. The Mod Electronics Mini Series reverb tanks are made using the same high quality components as the larger 4, 8, and 9 size reverb tanks but have been compacted into the smallest possible size that still provides a lush sounding spring reverb. These tanks are the perfect size for amps without a ton of space, pedal boards, studio equipment, and Eurorack and other synthesizers.
$19.95
Reverb Tank - Mod® MN-8EB2C1B, Medium Decay, 3-Spring, Mini
Compatible amps include any reverb that uses _BB_C1B type tanks. The Mod Electronics Mini Series reverb tanks are made using the same high quality components as the larger 4, 8, and 9 size reverb tanks but have been compacted into the smallest possible size that still provides a lush sounding spring reverb. These tanks are the perfect size for amps without a ton of space, pedal boards, studio equipment, and Eurorack and other synthesizers.
$19.95
Reverb Tank - Belton, 9AB2C1B, Medium Decay, 3-Spring
Long (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Compatible amps include select Fender®models, plus others .
$20.95
DSP Module - ABE, Accu-Bell Effector, 3 Adjustable Effects
The Accu-Bell Effector offers reverb, chorus, and delay with adjustable setting and tap tempo. This module runs on 5.5V to 9.5V DC so it is easy to incorporate into effect pedal builds. Please see the attached datasheet for an example schematic.
$21.95
Reverb Tank - Accutronics, 8DB2C1C, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 310Ω in / 2,575Ω out. Input insulated/output grounded connectors. Vertical/connectors up mounting. Designed for applications in which the overall sound quality is important and a compact package is required.
$22.95
Reverb Tank - Accutronics, 8AB2B1B, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input grounded/output insulated connectors. Horizontal/open side down mounting.
$22.95
Reverb Tank - Accutronics, 8AB2A1B, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input grounded/output grounded connectors. Horizontal/open side down mounting. Designed for applications in which the overall sound quality is important and a compact package is required.
$22.95
Reverb Tank - Accutronics, 8DB2C1B, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 310Ω in / 2,575Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Designed for applications in which the overall sound quality is important and a compact package is required.
$22.95