Semiconductors

Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP
Dual low power opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.
$0.28
Op-Amp - TL072, Dual, Low-Noise, JFET Input, 8-Pin DIP
The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
$0.70
Op-Amp - TL074, Quad, Low-Noise, JFET Input, 14-Pin DIP
Low noise JFET quad operational amplifier. Incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. Features high slew rates, low input bias and offset currents, and low offset voltage temperature coefficients. Features:
  • Wide common-mode and differential voltage range
  • Low input bias and offset current
  • Low noise en = 15 nV/HZ
  • Output short-circuit protection
  • High input impedance JFET input stage
  • Low harmonic distortion: 0.01%
  • Internal frequency compensation
  • Latch up free operation
  • High slew rate: 16 V/us (typical)
$1.32
Op-Amp - TL082, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth TL082 opamps in an 8-pin DIP package. The TL082 offers a high input impedance and 4MHz bandwidth.
$0.21
Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $5.50
Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$7.95
Regulator - 5 Volt, Linear Voltage Regulator
5V Linear Regulator. Used in MOD® kits. This fixed-voltage monolithic integrated circuit voltage regulator is suitable for applications that required supply current up to 100 mA.
$0.50
Regulator - 7805, 5 Volt, 1A, Linear Voltage Regulator
5V linear regulator with up to 1 amp of current in a TO-220 package. This style of regulator can be found in many power supplies and also modular synth circuits as well as some stomp boxes. These voltage regulators are monolithic integrated circuits designed as fixed−voltage regulators for a wide variety of applications including local, on−card regulation. These regulators employ internal current limiting, thermal shutdown, and safe−area compensation. With adequate heatsinking they can deliver output currents in excess of 1.0 A. Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain adjustable voltages and currents.
$0.65
Regulator - LM317T, Adjustable Output, 1.5A, Linear Voltage Regulator
Linear regulator with an adjustable voltage range from 1.2V to 37V. This regulator can supply 1.5A of current making it a great option for power supplies.
$0.56
Switch - Vibrato LDR, for Fender® Amps
Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.
  • Non-polarized optical side is indicated by silver dot and slightly longer leads
  • Resistive side is indicated only by slightly shorter leads
$8.95
Transistor - 2N2222A, TO-18 case, NPN
The 2N2222A is a NPN transistor in a TO-18 metal case. The 2N2222A is commonly used in fuzz pedals.
$0.95
Transistor - 2N3055, High Power NPN Silicon, TO-3 Case
15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.
  • Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
  • Safe Operating Area - Full Power Rating to 40 V
$3.25
Transistor - 2N3904, TO-92 case, NPN
General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.
$0.18
Transistor - 2N3904, TO-92 case, NPN, Lead Free
General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3906 see P-Q2N3906-LF.
$0.35
On Backorder
Transistor - 2N3906, TO-92 case, PNP
General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. For the NPN 2N3904 see P-Q2N3904
$0.28
Transistor - 2N3906, TO-92 case, PNP, Lead Free
General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3904 see P-Q2N3904-LF.
$0.45
Transistor - 2N5087, Bipolar, General Purpose, PNP
2N5087 PNP Bipolar Junction Transistor in TO-92 package. For the NPN 2N5087 see P-Q2N5088
$0.28
Transistor - 2N5088, Bipolar, General Purpose
2N5088 NPN Bipolar Junction Transistor in TO-92 package
$0.20
Transistor - 2N5089, TO-92 case, NPN
General purpose low level, low noise amplifier. Silicon NPN transistor.
$0.39
Transistor - 2N6027 Programmable Unijunction
2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.
$1.45
Transistor - 2N7000, Mosfet, Small Signal
2N7000 N-channel enhancement mode field effect transistors. 2N7000 MOSFETs are used in many DIY projects such as boost and distortion effects pedals.
Features:
  • Voltage Controlled Small Signal Switch
  • High Saturation Current Capability
  • Rugged and Reliable
  • High Density Cell Design for Low RDS(ON)
$0.45
Transistor - BC550 B, TO-92 case, NPN
Low noise transistor for audio frequency amplifier applications.
$0.19
Transistor - Fender®, A1837, amplifier application
A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.
$3.95
Transistor - J113, JFET, N-Channel,TO-92
J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
  • Max drain to gate voltage = 35 V
  • Max gate to source voltage = -35 V
  • Max forward gate current = 50 mA
$0.49