Semiconductors

P-QLM386N1 Audio Power Amplifier - LM386N-1, Low Voltage
LM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.
$1.70
P-QRECT-X Bridge Rectifier - Single-phase, 2A, In-line
2A bridge rectifier in an inline package ideal for PCB use. Features:
  • Low reverse leakage
  • Low forward voltage
  • High forward surge current capability
$0.83
P-QBR-34 Bridge Rectifier - Single-phase, 3A 400V
A full wave rectifier with 4 elements in a bridge circuit so that DC voltage is obtained from one pair of junctions when an AC voltage is applied to another pair of junctions.
$0.95
P-Q1N270 Diode - 1N270, Germanium, DO-7
1N60 point-contact germanium diodes in a DO-7 package. 1N60 diodes were used in many vintage electronics and also make for great clipping diodes in stompbox effects pedals. The MXR® Distortion+ uses the 1N270
$1.75
P-Q972 Diode - 1N34A Germanium, low leakage
The 1N34A Germanium diode is an old standby in electronics. Widely used for detecting the rectifying efficiency or for switching on a radio, TV or stereo etc.
$1.75
P-Q1N5817 Diode - 1N5817, Schottky, High Switching Speed
Schottky diode with low forward voltage drop and high switching speeds.
$0.15
P-Q1N5818 Diode - 1N5818, Schottky, High Switching Speed, 30V, 10A
1N5818 schottky diode with low forward voltage drop and high switching speeds.
  • Very small conduction losses
  • Negligible switching losses
  • Extremely fast switching
  • Low forward voltage drop
  • Avalanche capability specified
$0.15
P-Q1N60 Diode - 1N60, Germanium, DO-7
1N60 point-contact germanium diodes in a DO-7 package. 1N60 diodes were used in many vintage electronics and also make for great clipping diodes in stompbox effects pedals.
$1.25
P-Q1N914 Diode - 1N914, Small Signal
The 1N914 is a small signal diode similar to the 1N4148 and is common in many older electronics. The 1N914 is general purpose and can be used in a multitude of different applications.
$0.18
P-QBAT41 Diode - BAT41, Schottky, Small Signal
The BAT41 is a schottky diode used in many DIY projects. General purpose metal to silicon diode featuring very low turn-on voltage and fast switching. This device has integrated protection against excessive voltage such as electrostatic discharges.
$0.28
P-Q1N4937 Diode - Fast Recovery, 1A, 600V, 1N4937
A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
$0.20
P-Q1N400X Diode - General purpose rectifier, 1A, 1N400X
A semiconductor device which passes current in the forward direction (from anode to cathode), and blocks current in the opposite direction.
Starting at $0.15
P-QHFA16T Diode - Hexfred, 16A, 600V, ultrafast
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
$2.92
Save 27%
Originally: $4.00
P-QHFA16P Diode - Hexfred, ultrafast soft recovery, 16A, 1200V
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
$8.10
P-QHFA08 Diode - Hexfred, ultrafast soft recovery, 8A, 600V
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
$2.75
P-Q1N5404 Diode - Silicon Rectifier, 3A, 400V, 1N5404
A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction.
$0.35
P-Q971 Diode - small signal fast switching, 1N4148A
A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction. For extreme fast switches.
$0.20
P-Q1N4448 Diode - Small Signal Fast Switching, 1N4448
A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction. Features
  • Silicon epitaxial planar diodes
  • Low power loss, high efficiency
  • Low leakage
  • Low forward voltage
  • High speed switching
  • High current capability
  • High reliability

Used in a variety of Fender amps. Replacement for Fender part number 0006260049
$0.15
P-Q1N5408 Diode - standard recovery rectifier, 3A, 1000V, 1N5408
1N5408 Diode. Lead mounted standard recovery rectifiers are designed for use in power supplies and other applications having need of a device with the following features:
  • High Current to Small Size
  • High Surge Current Capability
  • Low Forward Voltage Drop
$0.38
P-Q1N474X Diode - Zener, 1W, 5% Tolerance
A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
Starting at $0.20
P-Q1N53X Diode - Zener, 5 Watt, ±5% tolerance
5W zener diodes that are great for use in tube amps. These are commonly used to drop B+ voltages for tube modification compatibility or to create low power modes for the amp. A zener is a semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
$0.55
P-QSBS14 Diode Thyristor - Peavey, SBS 14 Bidirectional, 8V, TO-92 Case
Designed for full-wave triggering in Triac phase control circuits, half-wave SCR triggering application and as voltage level detectors. Used in most Peavey linear power amplifier designs through 2000 including CS/M/DECA series power amps, IPA300, and all models using 402/602/304S/204S power modules.
  • Low Switching Voltage — 8 Volts Typical
  • Uniform Characteristics in Each Direction
  • Low On-State Voltage — 1.7 Volts Maximum
  • Low Off-State Current — 0.1 mA Maximum
$1.95
P-STIC-X IC Socket - Dual in-line package, 2.54mm Pitch, 7.62mm Spacing
IC component sockets for dual in-line package chips (DIP, PDIP, DIL, DIPP.) These sockets feature ladder style cases with tinned stamped and formed connections.
Starting at $0.15
P-QATTINY45 Integrated Circuit - ATtiny45, SN74LS175, 8-bit AVR Microcontroller, 8-pin DIP
This microcontroller is a part used in our Relay True Bypass Switching Part 3: Microcontrollers and Current Savings article. To read the full article and learn about a circuit for relay switching in stomp box effects, please see the following link. https://www.amplifiedparts.com/tech-articles/relay-true-bypass-switching-3 The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debugWIRE for on-chip debugging.
$1.85