Snubber Kit - eliminate fuzz from amplifier
Pictured: 2 × EL84 tubes
Pictured: 2 × Octal tubes
Pictured: 4 × Octal tubes
Click to zoom in
Customer Images:
Starting at: $8.25
In Stock
Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.
| 2 EL84 Tubes | 4 EL84 or 2 Octal Tubes | 4 Octal Tubes |
|---|---|---|
| x2 R-Q3K 3K Ohms 5 Watt power resistor |
x2 R-Q1D5K 1.5K Ohms 5 Watt power resistor |
x2 R-R820 820 Ohms 10 Watt power resistor |
| x2 R-B8D2M 8.2Meg Ohms 1 Watt resistor |
x2 R-B8D2M 8.2Meg Ohms 1 Watt resistor |
x2 R-B8D2M 8.2Meg Ohms 1 Watt resistor |
| x2 C-RD0047-600 0.0047uF 600 Volt Orange Drop Capacitor |
x2 C-RD01-600 0.01uF 600 Volt Orange Drop Capacitor |
x2 C-RD022-600 0.022uF 600 Volt Orange Drop Capacitor |
The "Snubber" circuit was published in the "Radiotron Designers Handbook" in the 1930s and is supposed to serve as a "[sonically transparent] shock absorber" to remove unwanted high frequencies and dangerously high voltages resulting from output transformer ringing, without the "brick wall" effect of using diodes. "Output transformer ringing often sounds like unwanted fizz on the notes - especially bass notes."
RoHS Compliant
| Circuit Type | Our Part Number | UPC/EAN |
|---|---|---|
| 2 × EL84 tubes | K-SNUB1 | 841358104879 |
| 4 × EL84 tubes | K-SNUB2 | 841358104886 |
| 4 × Octal tubes | K-SNUB3 | 841358104893 |
| No measurements are currently available for this product. Please contact us if you have any questions. |
| Packaging Dimensions | 1 in. × 1 in. × 1 in. | ||
| Weight (Packaging) | 2 × EL84 tubes version | K-SNUB1 | 0.0464 lbs. |
| 2 × Octal tubes version | K-SNUB2 | 0.0484 lbs. | |
| 4 × Octal tubes version | K-SNUB3 | 0.0764 lbs. |
| No measurements are currently available for this product. Please contact us if you have any questions. |
 Article = Instructions | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
I've a Marshall JCM2000 DSL 100. WI'll this work for that head? It looks like it's for Fenders?
Asked by Anonymous on October 30th, 2015.
October 30th, 2015
Staff MemberTop Contributor
The compatible snubber kit for 4 EL34 tubes would be SKU- K-SNUB3.
1 answers
Do you sell a snubber kit for 4 EL84'S?
Any input is appreciated.
Asked by Anonymous on August 2nd, 2016.
August 2nd, 2016
Staff Member
Yes, you can find our snubber kit for four EL84's by searching for SKU #: K-SNUB2 or here: https://www.tubesandmore.com/products/snubber-kit-4-el84-or-2-octal-tubes
1 answers
What about single output tube amps?
Asked by [email protected] on September 12th, 2020.
September 15th, 2020
Staff Member
The Snubber Kit is only designed for push-pull configurations.
1 answers
I am about finished building a JTM clone. I have used a lot of high end parts, I added some mods FX loop, DC heaters, PPIMV. I don't like having the diodes in the output circuit, do you recommend the snubber circuit?
Asked by RIXTONEY1 on July 1st, 2021.
July 7th, 2021
Staff Member
This circuit is primarily used for removing unwanted high frequencies and oscillations commonly referred to as "fizz" from power amps. If this kind of issue is not present on your amp you may not notice much of a difference with the snubber installed.
1 answers
I have a 30 W audio amplifier, it has the Marantz model 5 configuration with two EL34 valves. Do I need to use the snubber circuit? Which kit is suitable for this situation?
Asked by Anonymous on June 13th, 2022.
June 13th, 2022
Staff Member
Adding the snubber circuit to any amplifier is completely optional. If your amp uses two EL34s, then you would want to select the "2 Octal Tubes" option.
Customers who purchased this item also bought
Product Reviews