Speaker - Jensen® Vintage Alnico, 10", P10R for Fender®, 25W, 8Ω
Not a strict reissue, the P10R-F was born as a special edition of the P10R, developed in cooperation with Fender®, for the Custom Shop ’57 BandMasterä and the 20th Anniversary Vibro-Kingä amps. By means of a different cone membrane, the P10R-F has a warmer, ‘aged’ tone, and breaks up in a sweet, progressive manner. A very unique speaker for true Tone-Connoiseurs.
Guitarist Description: Warm, mellow tone with less bite and brightness than the standard P10R. In overdrive, this one eases into a creamy distortion.
- Lows: Loose
- Mids: Subdued
- Highs: Subtle
- Overdrive: Crunchy
For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.
SKU:
P-A-P10R-FEN-8
Item ID:
010746
UPC/EAN:
609722167208
Jensen Part Number:
ZJ05046
Brand:
JensenJensen VintageAlnico
Magnet Type:
Ohms:
Size:
Type:
RoHS Compliant
Accessory Items:
| Basket Material | Pressed Sheet Steel | |
| Cone Material | Paper | |
| Depth | 4.8031 in. | |
| Diameter | 10 in. | |
| Diaphragm Area (SD) | 330.10 cm2 | |
| Dust Dome Material | Non-treated Cloth | |
| Equivalent Acoustic Volume (VAS) | 28.50 liters | |
| Flux Density | 0.96 T | |
| Force Factor (BxL) | 5.89 Wb/m | |
| Inner Diameter | 9.0944 in. | |
| Linear Displacement, maximum (XMAX) | 1.00 mm | |
| Losses Electrical Resistance (RES) | 66.90 Ω | |
| Magnet Assembly Depth | 1.9488 in. | |
| Magnet Type | Alnico | |
| Magnetic Gap Depth | 6.00 mm | |
| Mechanical Compliance (CMS) | 185.00 µm/N | |
| Mechanical Moving Mass (MMS) | 18.00 g | |
| Mechanical Q Factor (QMS) | 18.99 | |
| Mounting Hole Bolt Circle Diameter | 9.6456 in. | |
| Mounting Hole Diameter | 0.2559 in. | |
| Musical Power | 50.00 W | |
| Nominal Overall Diameter | 207.00 mm | |
| Nominal Voice Coil Diameter | 25.00 mm | |
| Outer Diameter | 10.1969 in. | |
| Rated Power | 25.00 W | |
| Reference Efficiency (nO) | 0.92 % | |
| Resonance Frequency (ƒS) | 87.30 Hz | |
| Sensitivity @ 1W, 1m | 92.50 dB | |
| Surround Material | Integrated Paper | |
| Total Q Factor (QTS) | 1.79 | |
| Voice Coil DC Resistance (Re) | 6.96 Ω | |
| Voice Coil Diameter | 1 in. | |
| Voice Coil Former | Kapton | |
| Voice Coil Inductance @ 1 kHZ (LE) | 0.51 mH | |
| Voice Coil Winding Depth | 8.00 mm | |
| Voice Coil Winding Type | Copper |
| Packaging Dimensions | 11.811 in. × 12.2047 in. × 6.6929 in. | |
| Weight (Packaging) | 3.8 lbs. |
 Specification Sheet | All Models |
 Blues Sound Sample | All Models |
| Country Sound Sample | All Models |
| Jazz Sound Sample | All Models |
| Metal Sound Sample | All Models |
| Rock Sound Sample | All Models |
 Terminal Dimensions | All Models |
My Project Lists
Specifications, Files, and Documents
Sound Samples:
Blues Sound Sample00:50https://www.tubesandmore.com/sites/default/files/associated_files/p10rf_blues.mp3
Country Sound Sample00:35https://www.tubesandmore.com/sites/default/files/associated_files/p10rf_country.mp3
Jazz Sound Sample00:41https://www.tubesandmore.com/sites/default/files/associated_files/p10rf_jazz.mp3
Metal Sound Sample00:53https://www.tubesandmore.com/sites/default/files/associated_files/p10rf_metal.mp3
Rock Sound Sample00:41https://www.tubesandmore.com/sites/default/files/associated_files/p10rf_rock.mp3
Update Required To play the media you will need to either update your browser to a recent version or update your Flash plugin.
Terminal Dimensions Questions and Answers
Click each question to see its answers.
1 answers
I an going to buy an old vibro king that I want to sound like a vibro king 20th anniversary. Are these the ones to buy? And what impedance should I use for a vibro king? Thank you!
Asked by Anonymous on December 14th, 2015.
December 15th, 2015
Staff MemberTop Contributor
These are the speakers used in the 20th anniversary Vibro King. You would want to consult an owners manual or schematic for your amp's impedance.
1 answers
With the AlNiCo P10R, does the bass still "flub" at maximum volume as the stock ceramic speaker (C10R) does in a Fender Princeton 65 Reverb Reissue? Would going to a 40 watt rated power from a 25 watt help with the "Bass Flubbing"?
Asked by Anonymous on September 21st, 2017.
September 21st, 2017
Staff Member
The low end on the P10R is going to be loose as well as the 40 watt P10Q. Please visit the tone generator to have a Jensen rep help you find the right speaker. https://www.jensentone.com/tone_generator.
Product Reviews
Wanted to tame the highs in my Fender Pro Junior IV with a different Alnico speaker.
The challenge was the depth of the cabinet, and the P10RF is the same size as the original P10R.
It did tame some of the high-end in the amp so mission accomplished.
Great speaker. I put it in a 68 Custom Princeton Reverb that breaks up on it's own pretty early. I wasn't sure if it was the right for the amp at first but after two weeks of playing it sounds a lot better. So it does need time to break in. This speaker is good for a smooth 50s-60s tone for playing and recording at home when you want early break-up. Probably not ideal for a band if it's your only speaker unless you're doing really raunchy blues. Not sure how much different this is than the regular p10r but it looks cooler.