Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω

Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω

Jensen
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 1
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 2
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 3
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 4
Click to zoom in
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 1Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 2Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 3Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω image 4
Customer Images:
No Images yet! Submit a product image below!
$56.95
In Stock

Developed as the ceramic version of the P10R, for low-powered studio amps, the C10R is revered for having been the speaker of the Blackface Princeton®, the Princeton Reverb® and many others. The combination of the warm sounding circuit of the Princeton and the bright, colorful tone of the C10R delivers magical tones in any recording session.

Guitarist Description: Colorful bell-like chime which transitions into a gritty response when presented with overdrive distortion.

  • Lows: Loose
  • Mids: Firm
  • Highs: Bright
  • Overdrive: Edgy/Crunchy

For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.

SKU:
P-A-C10R
Item ID:
001916
UPC/EAN:
8034028640131
Jensen Part Number:
ZJ05070
Brand:
JensenJensen VintageCeramic
Magnet Type:
Ohms:
Size:
RoHS Compliant
Product Measurements by Type
Basket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth3.7125 in.
Diameter10 in.
Diaphragm Area (SD)330.10 cm2
Dust Dome MaterialSolid Paper
Equivalent Acoustic Volume (VAS)23.80 liters
Flux Density1.00 T
Force Factor (BxL)6.42 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)0.80 mm
Losses Electrical Resistance (RES)42.00 Ω
Magnet Assembly Diameter3.3858 in.
Magnet TypeFerrite
Magnetic Gap Depth6.00 mm
Mechanical Compliance (CMS)154.00 µm/N
Mechanical Moving Mass (MMS)17.60 g
Mechanical Q Factor (QMS)9.00
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power50.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter25.00 mm
Outer Diameter10.1969 in.
Rated Power25.00 W
Reference Efficiency (nO)1.50 %
Resonance Frequency (ƒS)96.60 Hz
Sensitivity @ 1W, 1m93.60 dB
Surround MaterialIntegrated Paper
Surround TreatmentYes
Total Q Factor (QTS)1.47
Voice Coil DC Resistance (Re)6.70 Ω
Voice Coil Diameter1 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)0.53 mH
Voice Coil Winding Depth8.00 mm
Voice Coil Winding TypeCopper
Packaging Information
Packaging Dimensions11.811 in. × 12.2047 in. × 6.6929 in.
Weight (Packaging)3.3 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

Sound Samples:

PDF: Specification Sheet Specification Sheet153.69 KB
PNG: Terminal Dimensions Terminal Dimensions21.21 KB

Questions and Answers

Click each question to see its answers.
Asked by Pjalmy on September 2nd, 2017.
Matt H.
September 6th, 2017
Staff Member
This speaker is made in Italy.
Asked by Anonymous on August 21st, 2019.
BradWbr
August 21st, 2019
Staff Member
If using two of these wired in parallel, yes. The wattage of the amp should be 35W and two of these speakers will total 50W when wired in parallel which should be high enough to safely handle any volume levels the amp can provide.

Product Reviews

5.00 out of 5 based on 1 reviews
OTH - May 27th, 2015
5 out of 5

The new Jensen C10R arrived safely, promptly and was exactly what I wanted.
I replaced the speaker in my 68 Princeton Reverb reissue and it's perfect.