Products
No product page found for product speakers.
Showing search results for speakers
Showing results for speaker. Search instead for speakers
Vacuum Tube - 6V6, Double Mica, JJ Electronics
A custom version of the JJ 6V6-S with a double top mica for increased stability. The double mica improves support for the tube structure and reduces mechanical vibrations in its components. These double mica 6V6 tubes are a great option for combo amps and any amplifiers exposed to speaker vibrations. The JJ Electronic 6V6S is another modern classic from JJ. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it to handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. The highs come in clean and smooth with a lot of clarity. The mids are full and distinctive. The lows are fat and punchy. These tubes can cover a spectrum of sounds and styles all within the same amplifier.
Starting at $23.80
Speaker - Jensen® Jets, 12", Silverbird, 70W, Ferrite, 8Ω
The Silverbird 12” speaker is inspired by the Blackbird 12 / 40 “Reinforced AlNiCo'' speaker. The Silverbird 12” provides a proper vintage tone that is optimized for contemporary players. It retains the delicate and detailed top end of its AlNiCo counterpart, crucial for a good clean tone and a clear and expressive midrange. Its robust and warm low end provides a solid foundation for an overall balanced, powerful, and lively tone, even with higher gain applications. Guitarist Description: Intricate and nuanced high-frequency range as well as a lucid and expressive midrange. Its thick and warm low-frequency range provides a stable base for a well-balanced and full sounding tone.
- Lows: Robust
- Mids: Clear
- Highs: Detailed
- Overdrive: Crunchy
$117.95
Speaker - Jensen® Jets, 10", Silverbird, 50W, Ferrite, 8Ω
The Silverbird 10” speaker is a well-balanced speaker that takes inspiration from the Blackbird 10 / 40 “Reinforced AlNiCo” tonal imprint. It retains the immediacy of the best 10" AlNiCo speakers, while also providing a powerful bass range that is tight enough for higher gain applications. The speaker is highly versatile and can fit nicely in a wide range of musical genres with its open and detailed vintage-inspired tone. Guitarist Description: Powerful bass range, tight enough for the higher gain applications, yet warm and full.
- Lows: Warm
- Mids: Detailed
- Highs: Open
- Overdrive: Crunchy
$93.95
Speaker - Jensen® Jets, 8", Falcon, 30W, Ferrite, 8Ω
The Falcon 8" speaker produces the same warm and expressive sound and its 10” and 12” counterparts. It offers a smooth and dynamic response that is ideal for both clean and pushed tones. The top end is carefully tailored to provide a balanced and nuanced sound, while the strong low-mid and bass response deliver a powerful and immediate tone. Whether you’re playing blues, rock, or metal, the Falcon 8 / 30 is sure to impress. Guitarist Description: Rich and well-balanced bass with a tight and precise midrange. The treble notes are bright and clear, with a sweet and smooth response.
- Lows: Balanced
- Mids: Vocal
- Highs: Smooth
- Overdrive: Fat
$55.95
Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
Starting at $2.15
package of 4
Washer - #8, Internal-External Tooth Lock, Steel
Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.
$2.65
package of 10
Washer - External Tooth Lock, Stainless Steel
Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
Starting at $1.09
package of 10
Nut - Hex, Stainless Steel, Imperial Thread
Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
$0.89
package of 5
Speaker - Eminence®, 12", Pete Anderson HempDog, 150W, 8Ω
Special Order Item
Multi-platinum, Grammy Award-winning producer/guitarist Pete Anderson wanted to combine the tonal characteristics from two of his favorite Eminence speakers into a single 12” model. The HempDog 12 borrows the warmth from the Cannabis Rex, and the neutral, clear tone from the Legend EM12.
$144.99
Out of Stock
¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$7.35
Speaker - Jensen® Vintage Neo, 12", N12K, 100W, 16 Ω
The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle. Guitarist Description: Heavy on the mids with a solid, straightforward tone. Presented with overdrive distortion, it powers through with lows that are bold and heavy.
For the 8 ohm version, see P-A-N12K-8
- Lows: Tight
- Mids: Aggressive
- Highs: Subtle
- Overdrive: Edgy/Crunchy
For the 8 ohm version, see P-A-N12K-8
Speaker - Jensen® Jets, 10", Blackbird, 40W
The 10" Blackbird 40 is the smaller sibling of the 12" Blackbird 40, famous for its exclusive “Reinforced AlNiCo” magnet, and the 1 ¾” (32mm) copper-wound voice coil. See P-A-JP12-40BBX for the 12” version.
The power rating of this smaller speaker mirrors the larger 12" at 40W, with a very similar efficiency - delivering more than 96dB with ease. The tonal qualities of this speaker are also very close; the 10" Blackbird 40 is distinctively vintage-voiced, with a warm-yet-solid bass range, the classic sparkle and chime that are associated with AlNiCo speakers, and all the immediacy and forwardness that are expected from a high quality 10” speaker.
“The Jensen Blackbird 40 speakers are a revelation, and in a way, a revolution for us.
The power rating of this smaller speaker mirrors the larger 12" at 40W, with a very similar efficiency - delivering more than 96dB with ease. The tonal qualities of this speaker are also very close; the 10" Blackbird 40 is distinctively vintage-voiced, with a warm-yet-solid bass range, the classic sparkle and chime that are associated with AlNiCo speakers, and all the immediacy and forwardness that are expected from a high quality 10” speaker.
“The Jensen Blackbird 40 speakers are a revelation, and in a way, a revolution for us.
$194.99
Wood Tack - Screw Nail, Steel, 20mm
Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.
$0.35
Connector - Quick Disconnect, .187”, Fully Insulated
Fully insulated quick disconnect connectors for use with spade lugs. These connectors are size .187” and fit wire gauges 16-22AWG. These connectors are simple to attach to speaker wires using a crimping tool such as S-T-CP412G.
$1.55
package of 10
Terminal Board - for Speaker Frames
Two lug terminal boards for speaker frames. This board can be used to repair speakers with damaged or missing wire mount boards.
$1.00
¼" Plug - Switchcraft, cable-mount, for thicker cables
Switchcraft 285L ¼” plug for large cables. The 285L features the same spec’s and build quality as the Switchcraft 280 but features a larger cable clamp and a .375" rear hole in the handle. These are great plugs for thicker wires such as speaker cables. Specifications:
- Sleeve, Tip and Body: Nickel-plated copper alloy
- Terminals: Solder lug - Tinned copper alloy
- Handles: Shielded - machined Nickel-plated copper alloy
- Tubular insulator inside handle
$6.75
Speaker - Jensen® Jets, 12", The Raptor, 100W
The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones. Guitarist Description: Powerful, smooth and warm. Excellent definition in the upper midrange. When presented with overdrive distortion, it exhibits a silky, full-sounding lead tone.
- Lows: Fat/Deep
- Mids: Firm/Vocal
- Highs: Subtle/Extended
- Overdrive: Smooth/Crunchy
Starting at $117.60
Save 15%
Originally: $138.35
Guitar Amplifier Electronics: Fender Bassman
by Richard Kuehnel
Fender designed the Bassman in 1952 to be an amplifier for its new Precision Bass. The amp had a 15-inch speaker with a closed back and used a pair of 5881 beam power tetrodes for lots of volume. Throughout the decade it would be modified and improved until culminating in the model 5F6-A.
$48.95
Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.79
package of 4
Diaphragm Kit - Peavey, RX™ 22N, for RX22N, RX22, 22XT+
Genuine Peavey diaphragm kit for the RX22N, RX22, and 22XT+ drivers. The RX™ 22N diaphragm kit includes ferrofluid, 22N spacer gasket, 22N mounting screws, installation instructions, and material safety data sheet. Features:
Includes:
- Professional and heavy duty
- Commercially pure titanium dome
- Extended frequency range
- Field replaceable
- Integral dome/suspension
Includes:
- One (1) ferrofluid filled packet
- This instruction sheet/ Material Safety Data Sheet
- RX 22 replacement diaphragm
- Kapton Spacer Shim (for use with RX22 and 22XT)
- 8-32 screws
$65.45
Speaker - Eminence American, 10", Delta 10, 350W, 8Ω
Special Order Item
Recommended for professional audio and bass guitar applications as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures.
$139.99
Out of Stock
Speaker - Jensen® Jets, 12", Blackbird, 40W
The Blackbird 40 is the first speaker in the Jet Series featuring Jensen's exclusive Reinforced AlNiCo magnet technology. The voice of the Blackbird 40 offers a powerful, controlled bass range and all the sparkly brilliance that is typical of the classic Jensen Speakers. Equally suited to clean, quasi-acoustic tones, to crunchy overdrive ones, up to powerfully distorted lead tones, the Blackbird 40 offers a very distinct yet versatile character. It suits a wide range of applications, form the traditional, warm, jazz, country, rock and blues tones, up to the fiercer brit-style power-chords and lead lines.
$217.69
Integrated Circuit - Spin FV-1, DSP, Multi-Effect / Reverb
The Spin Semiconductor FV-1 is a complete reverb solution in a single IC. With integrated stereo ADC and DACs, the FV-1 can be treated like any other analog component in your product's signal path. The FV-1 can access a total of 16 programs, 8 are built into the internal ROM and the designer may elect to connect a serial EEPROM with 8 additional programs. By using an external EEPROM, the designer can distinguish his product from others by creating a custom program set without the need for a microprocessor in the system. With 3 potentiometer inputs, programs may have real time variable parameters such as decay time in a reverb, rate and depth in a chorus or frequency in a filter. These inputs are available as coefficients to your program and may be used independently of each other. The rich instruction set allows users to program effects of all kinds. With instructions like LOG and EXP, users can easily program audio expansion and compression routines.
$17.50
Speaker - Jensen® Vintage Neo, 12", N12K, 100W, 8 Ω
The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle.
$207.95