You are here

Speakers

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
P-AD-CH90Diaphragm - Peavey, CH-90, 8Ω

CDH-90 Horn Diaphram #70777115, 8 Ohm


$16.95
Click to read more about this product.
P-AD-PMR30851Diaphragm - Peavey, PMR30851

Dia. 1 Dome Butterfly Diaphram # 70777146, 8 Ohm


$19.95
Click to read more about this product.
P-AD-14XTDiaphragm Kit - Peavey, 14XT Driver

Peavey 14XT™ Diaphragm replacement kits include complete gap cleaning instructions. (To prevent gap contamination by foreign materials, a failed diaphragm assembly should not be removed before a new diaphragm assembly is ready to be installed.)


$27.95
Click to read more about this product.
P-A-14XTDriver - Peavey, 1", 14XT, 50W

The 14XT is a high frequency compression driver designed to operate between the frequencies of 1,000 Hz to 18 kHz and can handle 100 watts of peak power. The 14XT is designed with a solid, one-piece titanium diaphragm, a 1.4" voice coil, and a high-temperature kapton coil former. Voice Coil: 1.4" Throat Parameter: 1" / 25 mm Nominal Impedance: 8 Ohms Minimum Impedance: 7.1 Ohms DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 100 W peak 50 W program 25 W continuous Sensitivity: 102 dB SPL 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 1 kHz to 18,000 Hz Recommended Crossover: 1,800 Hz at 12 dB / Octave Lowest Recommended Crossover: 1,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voi


$39.95
Click to read more about this product.
P-A-RX14Driver - Peavey, 1", RX 14, 60W

1" throat diameter, 8 ohms, 60 watts, 1.5-20k response.



  • Diameter: 1.4"
  • Throat Parameter: .938" / 23.8 mm
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 7.1 Ohms
  • DC Resistance: 6.8 Ohms
  • Power Capacity 1000 Hz to 20,000 Hz: 120 W peak, 60 W program, 30 W continuous
  • Sensitivity: 104 dB SPL 1 Watt at 1 meterOn-axis on 90° H x 45° V horn
  • Nominal Efficiency: 30%
  • Frequency Response: 1.5 kHz to 20 kHz
  • Recommended Crossover: 1,800 Hz at 12 dB / Octave
  • Lowest Recommended

$49.95
Click to read more about this product.
P-AD-RX22-22XTDiaphragm Kit - Peavey, RX22 and 22XT+
Combined replacement diaphragm kit for RX™ and 22XT high frequency drivers. RX™ 22 / 22XT diaphragm kit includes ferrofluid, 22XT spacer gasket, 22XT mounting screws, installation instructions, and material safety data sheet.
$58.10
Click to read more about this product.
P-AM-SCMagnet - Peavey, for Scorpion
Magnet for Peavey Scorpion speaker.
$72.95
Click to read more about this product.
P-AB-1505-8Speaker Basket - Peavey, 1505-8 DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1505-8 DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$89.95
Click to read more about this product.
P-AB-1505-8-KSpeaker Basket - Peavey, 1505-8 KA DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1505-8 KA DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$89.95
Click to read more about this product.
P-AB-1502-8Speaker Basket - Peavey, 1502-8 DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1502-8 DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$99.95
Click to read more about this product.

Pages

(2 pages)
Subscribe to RSS - Speakers