You are here

Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone.

Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(48 pages)
P-A-T5779Speaker - Celestion, 1.4", CDX14-2420, 70 watts

Special Order Item

Speaker, Celestion, CDX14-2420, 1.4 in., 8 ohm Features:



  • 1.4" exit, neodymium magnet, 60mm (2.4") voice coil compression driver provides 70Wrms (AES standard) power handling and 106.5dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

$289.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5782Speaker - Celestion, 15", T.F. Series 1530e, 400 watts

Special Order Item

Speaker, Celestion, TF1530e, 15 in., 8 ohm Features:



  • 15" driver provides extended low frequency range
  • 3" edgewound voice coil enables 98dB efficiency and 400Wrms (AES standard) power handling
  • Vented magnet assembly for enhanced cooling
  • Kevlar-loaded cone with sealed surround and damping for reduced distortion
  • Special consideration is paid to materials and construction to deliver maximum reliability
  • Suitable for use in 2-way and 3-way systems

$144.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5796Speaker - Celestion, 1", CDX1-1446, 20 watts

Special Order Item

Speaker, Celestion, CDX1-1446, 1 in., 8 ohm Features:



  • 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
  • 20Wrms power handling (AES standard) and 106dB sensitivity
  • 35mm/1.38in screw attachment
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
  • Suitable for 2-way and 3-way systems

$44.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5806Speaker - Celestion, 18", CF18VJD, 1600 watts

Special Order Item

Speaker, Celestion, CF18VJD, 18 in., 8 ohm Features:



  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1600Wrms (AES Standard) power handling and 97dB sensitivity
  • 5" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented front plate increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion

$575.00
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5820Speaker - Celestion, 2.7", AN2775 Compact Array, 20 watts

Special Order Item

Speaker, Celestion, AN2775 Compact Array, 2.7 in., 8 ohm Features:



  • Compact and lightweight, full-range neodymium loudspeakers
  • Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
  • Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
  • Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
  • Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
  • Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
  • Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion
  • Designed to be weather resistant for outdoor applications

$36.00
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5823Speaker - Celestion, 1", CDX1-1445, 20 watts

Special Order Item

Speaker, Celestion, CDX1-1445, 1 in., 16 ohm Features:



  • 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
  • 20Wrms power handling (AES standard) and 106dB sensitivity
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) used to optimise both magnet and acoustic design
  • Suitable for 2-way and 3-way systems

$44.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5827Speaker - Celestion, 1.4", CDX14-3060, 75 watts

Special Order Item

Speaker, Celestion, CDX14-3060, 1.4 in., 8 ohm Features:



  • 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

$164.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5828Speaker - Celestion, 18", CF1830E, 700 watts

Special Order Item

Speaker, Celestion, CF1830E, 18 in., 8 ohm Features:



  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 700Wrms (AES Standard) power handling and 94dB sensitivity
  • 3" high temperature, multi-layer voice coil for greater motor force
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Balanced Airflow Venting (BAV) on the front-plate increases airflow to provide enhanced cooling
  • Dual Magnet Motor (DMM) incorporates a secondary magnet used to increase overall motor force (Bl) without the need for any additional increase in magnet size
  • “Multi-roll” surround provides exceptional linearity at extremes of cone excursion

$189.00
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5829Speaker - Celestion, 1", CDX1-1010, 15 watts

Special Order Item

Speaker, Celestion, CDX1-1010, 1 in., 8 ohm Features:



  • Very lightweight, low-profile ferrite magnet compression driver
  • 15Wrms (AES standard) power handling and 107dB sensitivity, 1500-20,000Hz frequency range
  • Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
  • Ideal for entry-level two-way and three-way sound reinforcement cabinets

$29.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-A-T5838Speaker - Celestion, 2", CDX20-3075, 75 watts

Special Order Item

Speaker, Celestion, CDX20-3075, 2 in., 8 ohm Features:



  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

$229.99
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(48 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Speakers & Components