Speakers & Components

HF compression driver, 1" throat and ceramic magnet.

A firm favourite with lead guitarists, the Classic Lead features a tightly controlled low-end, with strong high bass / low mid punch, aggressive mid range attack and a powerful yet controlled top-end. for power chords it has the tone to make its presence felt but the subtle high-frequency roll-off makes it ideal for solos, able to project single notes on loud stages without becoming shrill. Celestion Classic Series guitar speaker. Developed in the late 1970s, the Classic Lead uses a fibreglass voice coil former to deliver an 80W power rating and a unique dynamic sound.

The Mod 12-110 is a 12" ferrite speaker with 110 watts of power. Strong, punchy, and articulate with emphasis on the mids. It responds to overdrive distortion with a tight and balanced fuzz that remains strong and straightforward.

8" low frequency driver providing 94dB sensitivity.

The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.

British lead/rhythm guitar 12" speaker. The epitome of British tone with a complete tonal balance, grunt and punch in the lows, warm/tailored mids, and nice, clear, open/airy highs.

Recommended for professional audio and bass guitar applications as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures.

The Mod 10-70 is a 10" ferrite speaker with 70 watts of power. Thick, straightforward tone and fat bass frequencies. It exhibits a bass heavy, dirty grit when presented with overdrive distortion.

The 1020 is a bass and mid range driver with a high sensitivity. It is ideally suited to compact enclosures and high pass systems.

This bass and mid range driver is suitable for use in 2-way systems. It features an extended low frequency range and edge-wound voice coil for high efficiency and power handling.

Supertweeter - APT 50 Driver (P-A-APT50-8) with APT 80S Horn (P-A-APT80S)

For use on Jensen P-A-P15N and P-A-P12N-NB to complete the vintage look of the originals. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.

The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.

Lead/rhythm guitar 12" American speaker. Nice tight low-end, smooth midrange and top end sparkle.

For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.

Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)

Neodymium 10" speaker, 8 ohm. Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures.

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.

The F12-X200 is Celestion’s answer to the growing trend of full-range flat-response speakers. The F12-X200 provides a massive 200W power rating. Celestion’s decades of experience in speaker construction shines in this unique design that offers neutral voicing while maintaining the feel and response of a Celestion guitar speaker.

With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.

Combining decades of experience with advanced measurement and analysis, the V-Type has been built using a carefully balanced 'recipe' of old and new design techniques. It produces a heady, exciting modern vintage sound that just makes you want to keep on playing: a speaker that delivers authentic Celestion tone whatever your style. The V-type is a sweet sounding speaker with a superbly balanced tonal signature that imparts a vintage musicality to your tone.

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle. Guitarist Description: Heavy on the mids with a solid, straightforward tone. Presented with overdrive distortion, it powers through with lows that are bold and heavy.

• Lows: Tight
• Mids: Aggressive
• Highs: Subtle
• Overdrive: Edgy/Crunchy

For the 8 ohm version, see P-A-N12K-8

Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12M Heritage and G12H Heritage editions

Genuine Peavey diaphragm kit for the RX22N, RX22, and 22XT+ drivers. The RX™ 22N diaphragm kit includes ferrofluid, 22N spacer gasket, 22N mounting screws, installation instructions, and material safety data sheet. Features:

• Professional and heavy duty
• Commercially pure titanium dome
• Extended frequency range
• Field replaceable
• Integral dome/suspension

Includes:

• One (1) ferrofluid filled packet
• This instruction sheet/ Material Safety Data Sheet
• RX 22 replacement diaphragm
• Kapton Spacer Shim (for use with RX22 and 22XT)
• 8-32 screws