Products
No product page found for product switches.
Showing search results for switches
Showing results for switch. Search instead for switches
Transformer - Hammond, Line Step Up Isolation, Toroidal, 500 VA
Capacity: 500 VA
Dimensions: 9" long by 6" wide by 4" height
Features:
Dimensions: 9" long by 6" wide by 4" height
Features:
- Primary 120VAC, 50/60 Hz., Secondary 240VAC.
- Provides circuit isolation.
- Toroidal transformer for high isolation, low noise, light weight cool operation and low profile.
- 50 or 60 Hz.
$379.17
Effects Kit - Mod® Electronics, The Wave, Spring Reverb
The Mod® Electronics Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$360.00
Amp Kit - Mod® Electronics, MOD102+ guitar amp
The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
$315.00
Effects Pedal - Maxon, PAC9, Pure Analog Chorus
The PAC9 is a classic analog chorus featuring swirling warm chorus sounds and stereo output for a wide chorus spread. In addition to the standard Speed and Width controls, the PAC9 offers a Bright switch for a focused sound and a Pure switch that boosts the signal. Features
- Clean analog chorus sound using the Maxon MC4107D BBD chip
- Speed and Width controls
- Bright and Pure switches offer a variety of sounds for bold and deep chorus effects
- Widely adjustable Speed range of 0.33Hz - 8Hz.
$229.95
Hot Air Station - Atten, ST-862D, High Power, 1000W
The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.
$214.95
Effects Pedal - Maxon, SM9Pro+, Super Metal Pro Plus
The SM9Pro is an upgraded version of the classic SM9 from Maxon. The original core of the circuit was kept intact and bolstered to meet the needs of heavy metal guitarists. A refined EQ control featuring an adjustable mid scoop allows users to dial in the perfect balance for their sound. The gain control provides sounds that range from classic heavy metal to the devastating tones of modern metal.
$169.95
Soldering iron station - Weller, WE 1010, 70W, digital display
The Weller WE1010 is an excellent soldering station for professional use and beginner hobbyists alike. With increased power and stability, the WE1010 is an upgrade in many ways for users of the WES51 and WTCPT soldering stations.
$165.95
Effects Pedal - Maxon, OOD9, Organic Overdrive
The OOD9 is the updated version of the original Maxon overdrive pedal, the OD880. This overdrive is equipped with NJM4558D op amps for a warm and low-noise overdrive that pairs perfectly with tube amplifiers and other distortion pedals. The OOD9 offers a dynamic response that preserves the tone of the input providing a smooth and clear overdriven sound.
$157.95
Effects Pedal - Maxon, SD9, Sonic Distortion
The SD9 Sonic Distortion offers saturated distortion perfect for screaming leads and thick rhythms. The SD9 was designed in the same era as the OD9 and this pedal can go toe-to-toe with its overdrive counterpart. Providing smooth distortion, long sustain, and clear articulation, the SD9 can fill a room with classic distortion sounds. Features
- Bright distortion with articulate pick attack over the entire frequency range.
- Sweet harmonics and accentuated high-end tones
- True Bypass Switching
- Low noise mechanical switch
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$128.95
Effects Pedal - Maxon, OD9, Overdrive
The Maxon OD-9 is the original Tube Screamer TS9 circuit built by the company that designed this immensely popular overdrive pedal. They left no boxes unchecked by including a genuine JRC4558 and the only departure from the original is the inclusion of true bypass switching, a modern necessity. The OD-9 offers slightly more gain than the OD808.
Features
Features
- Identical to the original circuit and featuring the JRC4558 IC chip
- Natural tube-like overdrive that smoothly responds to dynamic signals
- True Bypass Switching
- Low noise mechanical switch
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$124.95
Effects Pedal - Maxon, GE601, Graphic Equalizer
The Maxon GE601 graphic equalizer is the perfect tool for dialing in guitar tone. The six bands are set with slide potentiometers offering precision controls with a visual representation of the sound spectrum. Each band can both cut and boost sound for a variety of tonal shaping effects as well as frequency specific boost effects.
Features
Features
- Six-band graphic eq with an overall level volume capable of producing various sounds
- Bands cover 100Hz to 3.2KHz for effective tone shaping with guitars
- Each band can cut or boost providing a variety of uses
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$120.95
Evaluation Board - EVB2130-P, SSI2130 VCO, Sound Semiconductor, Fully Populated
The SSI2130 offers unprecedented performance and features, but its ultra-compact QFN package can present prototyping challenges. The EVB2130 eases evaluation by providing a PCB that allows comprehensive exploration of capabilities. The EVB2130-P is fully populated and ready for the bench. With the exception of the SSI2130, all components are through-hole for easy construction and experimentation. A on-board +5V regulator and 2.5V reference simplify external power connections, and pots are provided for mixer control, PWM, and VCO setup. Switches ease selection of saw ramp direction plus Through-Zero and Pulse Modulation. Features
- PCB size: 108 x 82mm
- External Power: ±12V
- Inputs: Expo Freq 1V/Oct PWM In Aux 1 and 2 In FM In PM In Hard Sync Soft Sync
- Outputs: Sine Saw Triangle Pulse Square Mix Out
$110.95
Effects Pedal - Maxon, PT999, Phase Tone
The Maxon PT999 is a direct reissue of their classic 1970’s analog phaser. This pedal can range in speed from 0.2Hz up to 14Hz for a wide range of phase effects. The lower speeds offer slow moving phasing with a subtle and shimmering sound while faster speeds can take sounds into swirling and swooshing phaser sounds.
Features
Features
- Low-noise design with wide dynamic range perfect for both live sound and recording
- Works well with any electric instrument such as guitar, bass, and keyboards
- Offers a variety of sounds using the speed control to morph from clear and mild phase tones to heavy rolling phaser sounds
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$107.95
Pedal Kit - Mod® Electronics, Suspended Chime, Chorus, Delay
The Mod® Electronics Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the toggle switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$99.95
Effects Pedal - Maxon, OD808X, Overdrive Extreme
The OD808X is the perfect pedal for those wishing their OD808 went to 11. The OD808X offers more of everything with its extended drive, frequency response, and overall levels providing an articulate overdrive that can cut through any mix. Features
- Based on the classic natural drive sound of Maxon’s OD808 circuit.
- Offers an extended frequency range and response compared to the OD808. The additional range has been carefully tuned to provide clarity and accentuate the high-gain settings.
- OD808X offers more gain and harder clipping than the standard OD808, creating tube-like distortion with excellent note definition and clarity.
- OD808X features a buffered JFET bypass switching with a low impedance output, allowing it to drive long cables or other effect units without loss of signal.
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$99.95
Footswitch Box - Marshall, Two Button (Channel, Reverb)
Two button, channel and reverb. 1/4" Plug. Marshall M-PEDL-91004
For a similar generic footswitch box, see P-H471.
For a similar generic footswitch box, see P-H471.
$84.95
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.45
Pedal Kit - Mod® Electronics, The Persuader Deluxe, Overdrive
The Mod® Electronics Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion. A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$81.45
Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Pedal Kit - Mod® Electronics, Phase / Off, Modulation - Phaser
The Phase / Off is a four-stage phaser based around the Sound Semiconductor SSI2140 voltage-controlled multi-mode filter. This pedal offers classic phasing effects along with plenty of control to dial in the perfect amount of modulation using the Depth, Rate, and Regen knobs. The Stages switch can change the Phase / Off from four-stage phaser to a two-stage phaser providing a wide variety of different phasing sounds. Change the Mode switch from LFO to Manual to use the Phase / Off in fixed phase mode controlled by the Depth knob for unique filtering effects. The Phase / Off pedal kit is the second entry in the Nexus Series from Mod® Electronics. This series features a PCB base rather than the Mod® Electronics’ traditional point-to-point wiring kits to offer builders an even wider variety of effects to build. The Phase / Off is a great pedal for intermediate skill sets. It features an all through-hole build with pre-soldered SMT SSI2140. The pedal operates on 9VDC.
$79.95
Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .045" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 370mm x 106mm x 69mm
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
Guitar Wiring Upgrade Kit - Mod® Electronics, ES-335 Standard
The K-GMOD-6 is a vintage style wiring kit for ES-335 guitars. Use this kit to upgrade your current ES-335 electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$64.70
Parts Kit - MKIII / MKIV Fuzz Pedal, Premium Build
PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $63.61