Switches

Premium two position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details

• 8.89 mm bushing length
• Medium bat
• 2-Position On/On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

Features:

• Power Rating: DC9V, 1A
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free

Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.

Premium three position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details

• 5.59mm non-threaded bushing
• 3-Position On/On/On
• 4.95mm panel hole diameter
• Double pole/Double throw (DPDT)
• PC Pins

Features

• Power Rating: DC9V, 1A
• Contact Resistance: <20mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 30,000 Cycles
• RoHS & Lead-free

Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details

• 8.89 mm bushing length
• Medium bat
• 3-Position On/On/On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

Features:

• Power Rating: DC9V, 1A
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free

Keyed washer for use with mini toggle switches. These nickel plated washers work on any 1/4-40 UNS threaded bushing with a vertical key slot. A small anti-rotation tab is on the outer edge of this flat washer. These are the same as the stock washers included with Carling mini toggle switches.

Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC

.3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.

Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"

Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.

Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.

• Thread size = 15/32 - 32 thread pitch

Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details

• 8.89 mm bushing length
• Medium bat
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder lugs

Features:

• Power Rating: DC9V, 1A
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free

Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.

3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.

Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Audio taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

Carling miniature rocker switch, SPST with .187" tabs (Peavey Style). Matte Finish. Black base/actuator. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.

Premium two position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details

• 5.59mm non-threaded bushing
• 2-Position On/On
• 4.95mm panel hole diameter
• Double pole/Double throw (DPDT)
• PC Pins

Features

• Power Rating: DC9V, 1A
• Contact Resistance: <20mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 30,000 Cycles
• RoHS & Lead-free

Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details

• 5.59mm non-threaded bushing
• 2-Position On/On
• 4.95mm panel hole diameter
• Single pole/Double throw (SPDT)
• PC Pins

Features

• Power Rating: DC9V, 1A
• Contact Resistance: <20mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 30,000 Cycles
• RoHS & Lead-free

Carling miniature latching rocker switch, SPST, On-Off with .25" tabs. 0.48" x 1.072" mounting hole diameter, 16A, 125 VAC. Since its introduction, the Curvette switch has become the barometer for versatility and performance in the switch market. Self cleaning contacts and international approvals make the Curvette the switch of choice for many markets. Two color visi rocker to indicate “on” function. Patented mounting wings accommodate a wide range of panel openings.

Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.

Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.