Switches

Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
New!:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.55
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.75
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.
  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$2.95
On Backorder
Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $3.39
Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST latching On-Off footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$6.50
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.95
Switch - GØRVA, Mini Toggle, SPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.15
Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
  • SPDT ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.
$2.75
Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary Off-(On), push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.85
Switch - GØRVA, Mini Toggle, DPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.25
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$2.95
Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT latching footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
$2.95
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$3.89
Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$0.79
Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 3-Position On/On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.95
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$3.89
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
$3.85
Footswitch - 4PDT, Black, Solder Lugs
Quad Pole, Double Throw (4PDT), latching footswitch with 12 solder lugs.
$4.95
Footswitch - Carling, 112-P, SPDT
Carling SPDT latching footswitch used in footswitch boxes and effects pedals (112-P). This style of On-On footswitch can be found in many vintage stomp boxes and channel/effect footswitches. The two identical lugs are the two throws and the lug with a unique shape is the common pole.
$7.65
Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$0.89
Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$2.75
On Backorder
Footswitch - 3PDT, with built-in LED Ring
Colors Available:
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
$8.25
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Starting at $3.95