Switches

Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.25
Switch - Carling, Submini Toggle, DPDT, 2 Position, PC Pins
Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$4.15
Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
  • 0.354" bushing length
  • 3-Position
  • ¼" chassis hole diameter
  • DPDT ( Double Pole/ Double Throw) switch
  • Solder Lugs
Starting at $6.45
Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
$3.59
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder Lugs
$5.45
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.69
Switch - Carling, Mini Toggle, SPDT, 2 Position, PC Pins, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$3.85
Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $4.15
Switch - Carling, Mini Toggle, DPDT, 2 Position, PC Pins, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • PC mount pins
$4.95
Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
$5.45
Switch - GØRVA, Mini Toggle, DPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.95
Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$3.25
Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Single pole/Double throw (SPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
$1.35
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
Switch - GØRVA, Submini Toggle, DPDT, 3 Position, PC Pins, Medium Bat
Premium three position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 3-Position On/On/On
  • 4.95mm panel hole diameter
  • Double pole/Double throw (DPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
$1.95
Switch - Carling, Submini Toggle, SPDT, 2 Position, PC Pins
Carling submini toggle switch, SPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$4.95
Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.75
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2 Position On-On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$6.55
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$4.95
Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
  • SPDT ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.
$3.85
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Starting at $5.25
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
$4.95
Switch - GØRVA, Mini Toggle, SPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.69