Switches

Nut - Marshall style, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    Footswitch - Carling, DPDT, Side Solder Lugs
    Good latching stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
    $11.95
    Switch - Switchcraft, Slide, DPTT, 3-Position
    Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
    • Recommended .75 control cavity depth
    • 1.406” center-to-center mounting hole spacing
    • #4-40 screws recommended for mounting
    • Screws not included
    $5.35
    Nut - Large Dress Nut, Carling, 15/32-32UNS
    Colors Available:
    Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
    $1.29
    Switch - Switchcraft, Pickup Selector, for Gibson® Straight
    Colors Available:
    Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
    Starting at $18.95
    Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
    Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
    • SPDT ( Single Pole/ Double Throw) On-On switch
    • 0.275" bushing length
    • 0.270” bat length
    • ¼" chassis hole diameter
    • Right angle, PC Mount terminals

    Note: On-On switches may sometimes be referred to as On-None-On.
    $3.85
    Switch - Rotary, 3 Poles, 4 Position
    3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft. 3P4T rotary switch.
    $1.99
    Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
    0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
    $3.59
    Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
    Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
    • 8.89 mm bushing length
    • Medium bat
    • 3-Position On/On/On
    • ¼" mounting hole diameter
    • Double pole/Double throw (DPDT)
    • Solder lugs

    Features:
    • Power Rating: DC9V, 1A
    • Contact Resistance: <10mΩ
    • Insulation Resistance: 1000MΩ Minimum
    • Dielectric Strength: 1000V RMS @ Sea Level
    • Operating Temperature: -40°C ~ +85°C
    • Electrical Life: 40,000 Cycles
    • RoHS & Lead-free
    $1.95
    Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
    Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
    $11.50
    Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.25
    Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
    Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
    $2.95
    package of 5
    Footswitch - DPDT, Bottom Solder Lugs
    Carling, DPDT latching footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
    $10.95
    Optocoupler - Xvive, Vactrol, VTL5C Series
    High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
    Starting at $6.50
    Switch - Rotary, Impedance Selector, Replacement for Marshall
    Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
    $34.95
    On Backorder
    Switch - Carling, Toggle, DPST, On-Off, Solder Lugs, Short Bat
    Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length.
    Note: On-Off switches may sometimes be referred to as On-None-Off.
    $9.95
    Switch - Carling, Toggle, DPDT, On-On, Solder Lugs
    Carling, DPDT 2 position toggle with solder lugs (6A, 125V). 0.687" toggle length. On-On.
    Note: On-On switches may sometimes be referred to as On-None-On.
    $9.65
    Switch - Carling, Toggle, DPST, On-Off, Tabs, 15A
    Carling, DPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
    $7.45
    Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
    .3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.
    Starting at $1.80
    Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
    Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
    • 0.354" bushing length
    • 3-Position
    • ¼" mounting hole diameter
    • Double pole/Double throw (DPDT)
    • Solder lugs
    Starting at $5.25
    Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
    VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
    $8.40
    On Backorder
    Switch - Rocker, Lighted Power, Used in JCM Series & Others
    Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
    $12.50
    Locking Washer - Carling, for switches
    Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
    $3.95
    package of 5
    Footswitch - Carling, SPST, Momentary, Solder Lugs
    Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
    Starting at $9.50