Switches

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.

Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.

• 0.354" bushing length
• 2 Position On-On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Audio taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.

• 0.354" bushing length
• 3-Position
• ¼" chassis hole diameter
• DPDT ( Double Pole/ Double Throw) switch
• Solder Lugs

3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.

1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.

Carling, DPDT 2 position toggle with solder lugs (3A, 125V), .50" toggle length. On-On. Dimensions:

• Body Length (less solder lugs) = 0.984"
• Body Depth (height) = 0.580"
• Body Width = 0.528"
• Toggle Length =.50"

Note: On-On switches may sometimes be referred to as On-None-On.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.

Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.

SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.

Carling, SPST toggle, momentary. 3A 250V, 6A 125V. Made in Mexico.

High quality Alpha 3PDT footswitch with solder lugs and a long bushing. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 15.25mm
• Threading: M12 x 0.75
• Solder Lugs

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.

DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.

3 Position Les Paul/PRS style switch. US Retro-fit, black.

5-way pickup selector switch for Stratocasters. Black switch tip.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

Rectangular rocker switch that uses a round mounting hole. This black nylon rocker switch has a small panel footprint and is easy to add to projects due to the round mounting hole. Mounting nut and lock washer included.

• SPST
• On-Off
• 6A, 125VAC / 3A, 250VAC
• 12.2mm Mounting Hole

Heavy duty SPST Off-(On) momentary switch made in Italy by ST Professional. Rated for 2A at 240V, these switches can be used in a wide range of applications. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling momentary switches and provides tactile and audible feedback so the switching action is apparent to the user. The pins also feature eyelets so hardwiring is an option in addition to the standard PCB mount.

4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.