Switches

Good latching stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.

Heavy duty DPST latching switch made in Italy by ST Professional. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling switches and provides tactile and audible feedback so the switching action is apparent to the user. This version features standard solder lugs. This style of footswitch is similar to the vintage footswitches found in the Gary Hurst Fuzz King, the Hornby Skewes Shatterbox, the Jen Fuzz III, the Selmer Buzz Tone, and others.

Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.

• Recommended .75 control cavity depth
• 1.406” center-to-center mounting hole spacing
• #4-40 screws recommended for mounting
• Screws not included

Carling mini-toggle switch, SPDT. This switch features a flattened actuator.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder Lugs

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.

Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in Taiwan.

SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.

• SPST momentary switch
• Black finish and hardware
• Soft, silent switching with no click
• Normally open operation
• Solder lugs
• Nuts and washer included
• Note: Off-(On) switches may sometimes be referred to as Off-None-(On).

SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.

• SPST momentary switch
• Soft, silent switching with no click
• Normally open operation
• Solder lugs
• Nuts and washer included

Note: Off-(On) switches may sometimes be referred to as Off-None-(On).

Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

5-way pickup selector switch for Stratocasters. Black switch tip.

Carling, DPST 3 position toggle switch (play-stby-off). Length: 1.32" Width: 0.75" Body Depth: 0.78" Chassis Hole Diam: 0.50"

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
• Nickel Finish

Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Solder lug / panel mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.

Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.

Carling, DPDT 2 position toggle with solder lugs (6A, 125V). 0.687" toggle length. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.

Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs

• DPDT ( Double Pole/ Double Throw) switch
• 0.354" bushing length
• 0.409” bat length
• ¼" chassis hole diameter
• Solder terminals

Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.

Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details

• 8.89 mm bushing length
• Medium bat
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder lugs

Features:

• Power Rating: DC9V, 1A
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free

4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.

Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length. Note: On-Off switches may sometimes be referred to as On-None-Off.

3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.

.3A 125VAC. 2 pole, 6 position, solid 1/4" shaft. DP6T rotary switch.

Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details

• 8.89 mm bushing length
• Medium bat
• 3-Position On/On/On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

Features:

• Power Rating: DC9V, 1A
• Contact Resistance: <10mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 40,000 Cycles
• RoHS & Lead-free