Switches

Footswitch - SPST, Momentary, Solder Lugs, Soft Switch, Black
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
  • SPST momentary switch
  • Black finish and hardware
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included
  • Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$3.50
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
$4.95
Switch - Rotary, Impedance Selector, 3 Position
Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.
$16.95
Switch Accessory - Mini Toggle Caps
Colors Available:
Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
Starting at $0.59
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$4.95
Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
$5.35
On Backorder
Footswitch - 3PDT, with built-in LED Ring
Colors Available:
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
Switch Tip - Fender®, Stratocaster
Colors Available:
Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.
$4.25
package of 2
Switch - Carling, Toggle, DPST, On-Off, Tabs, 6A
Carling, DPST 2 position toggle switch, On-Off with .25" tabs (6A, 125VAC). Note: On-Off switches may sometimes be referred to as On-None-Off.
$6.55
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2 Position On-On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$6.55
Potentiometer - GØRVA, Linear, 16mm, Solder Lug, Solid Shaft
High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
Footswitch - DPDT, PC Mount, latching
Latching DPDT footswitch, PC mount. Made in Taiwan.
$4.55
Hex Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
Genuine Carling hex nut commonly used on full size toggle switches and footswitches. This nickel plated hex nut has a 15/32 threading.
$2.25
package of 5
Toggle Switch - Carling, DPDT, 2 Position, On-On, Terminals
Carling, 2 position DPDT toggle switch with screw terminals. On-On. Note: On-On switches may sometimes be referred to as On-None-On.
$9.85
Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$4.95
Potentiometer - GØRVA, Audio, 16mm, Solder Lug, Solid Shaft
High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Audio taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.40
Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.
$6.45
Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
$1.75
Switch - Carling, Toggle, DPDT, On-On, Short Bat
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$10.95
Switch - Carling, Mini Rocker, SPST, 16A, 125VAC
Carling miniature latching rocker switch, SPST, On-Off with .25" tabs. 0.48" x 1.072" mounting hole diameter, 16A, 125 VAC. Since its introduction, the Curvette switch has become the barometer for versatility and performance in the switch market. Self cleaning contacts and international approvals make the Curvette the switch of choice for many markets. Two color visi rocker to indicate “on” function. Patented mounting wings accommodate a wide range of panel openings.
$1.29
Switch - DIP, Slide, 0.1" Spacing
DIP slide switches with standard 0.1” (2.54mm) lead spacing. These small PCB mounted switches are used in many circuits such as mode settings in effects pedals. Specifications:
  • Contact Rating: 100mA 50VDC
  • Terminal: Brass with gold plating
  • Dielectric strength: 500VAC 1 minute
  • Insulation Resistance: 100mΩ min (500VDC)
  • Electrical Life: 2,000 cycles per position
  • Contact Resistance: 500mΩ max
  • Mechanical Life :≥100,000 Cycles
  • Operating Temperature :-25°C to +85°C
$0.59
Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
  • 0.354" bushing length
  • 3-Position
  • ¼" chassis hole diameter
  • DPDT ( Double Pole/ Double Throw) switch
  • Solder Lugs
Starting at $6.45