Switches

Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:

• SPDT ( Single Pole/ Double Throw) On-On switch
• 0.275" bushing length
• 0.270” bat length
• ¼" chassis hole diameter
• Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.

Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• PC mount pins

Extra thick M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These thick steel washers are a great way to add a classy look to projects.

Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).

Korg Tact switch under knob P8012S. SPST momentary, 0.25in. width.

Carling, SPST toggle, momentary. 3A 250V, 6A 125V. Made in Mexico.

Great replacement for stomp-box effects requiring a latching DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.

Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.

Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs

• DPDT ( Double Pole/ Double Throw) switch
• 0.354" bushing length
• 0.409” bat length
• ¼" chassis hole diameter
• Solder terminals

Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.

High quality Alpha 3PDT footswitch with solder lugs. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• Solder Lugs

High quality PCB mount 3PDT footswitch from Alpha. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• PCB mount pins

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.

Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Also used for bright switches in Fender black and silverface amplifiers. Upgrade cheap or malfunctioning switches with these high quality replacements.

• Recommended .75 control cavity depth
• 1.125” center-to-center mounting hole spacing
• Latching
• Screws not included
• See S-HS440-12 for compatible screws

High quality Alpha 3PDT footswitch with solder lugs and a long bushing. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 15.25mm
• Threading: M12 x 0.75
• Solder Lugs

Genuine Fender replacement switch. Push SLFLK Short Stroke. 6 pin PCB mount

DPDT momentary footswitch with PC terminals. Black with 6 terminals. AC125V 4A, AC250V 2A. PC mount version of P-H503.

Latching DPDT footswitch, PC mount. Made in Taiwan.

DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.

Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.

The Gorva Mechano is a premium 3PDT soft-touch latching footswitch. Gorva Designs have quickly established themselves as a high quality pedal parts company with their enclosures, see P-H1590BB-GORVA-X and P-H1590N1-GORVA-X, and the Mechano switches are no exception. With a life rating of 30,000 cycles, these switches outperform most stompbox switches.
Features:

• 3PDT latching stomp switch
• Soft touch actuation with a force of 1.0±0.3Kgf
• Green Case
• RoHS & Lead-free

Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• PC mount pins

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On